Jump to content
Sign in to follow this  

Newbie clutch question

Recommended Posts

I just picked up an EBC clutch kit with heavy duty springs off ebay. When comparing the new springs to the stock ones the new ones are much "beefier" looking but also about a 1/4" longer as well. I know that according the manual the stock springs have to be a certain length to be within spec. Do aftermarket springs have to meet the same specs as the stock ones? Thanks guys, this is my first clutch change.

Edited by bartmk

Share this post


Link to post
Share on other sites

With your bike having a cable clutch (i'm assuming it's stock?) I wouldn't be considering the EBC HD springs to be an upgrade. If you have converted to hydraulic, it'll be fine. I have found the clutch pull at the lever "too heavy" with these particular aftermarket springs.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×