Jump to content
Sign in to follow this  

Clickers keep spinning

Recommended Posts

I decided to adjust my suspension for the first time on my CR125R 2004 I put everything back to stock as a baseline and when I came to the rebound on the bottom of the shock, it just kept clicking around anti clockwise, the manual says there should be 30 clicks but it went on and on. The rebound on the forks had a similar problem where it got tight on both the clickers but never came to a stop. Again it was supposed to have 18 or more clicks but it had about 21 or so when I stopped as it got to the point where I didn't want to force it. Any ideas? It all seems to work fine over evertything on MX tracks and compared to other bikes I have ridden it has suspension on par or better.

Share this post


Link to post
Share on other sites

they often have a few more clicks than the manual but should have a definite stop

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...