Jump to content
Sign in to follow this  

front sprocket question

Recommended Posts

I just replaced my front sprocket on my 95 xr650l. I noticed there is a little play from side to side. Not much but maybe 1/32 or less. :smirk: But it was enough to ask the question. I seem to remember that there was a little play when taking it off. Please advise. Than you

Share this post


Link to post
Share on other sites

Yup.............normal,,,,but you an use a XR650R sprocket on the front,,put it on backwards and it fits,and is thicker at the splines which spreads the load out and slows/stops countershaft wear and fits tighter because of the extra thickness at the splines....do a search,Spud has a thread here on this ..

B

Share this post


Link to post
Share on other sites

Yes it is normal however I don't like it so what I did is applied blue loctite to the spline shaft and the new sprocket let it sit over night and its rock solid in the morning your good to go.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...