Jump to content
Sign in to follow this  

Looking for stock springs for a '07 YZ250

Recommended Posts

I'm in need of stock .44kg/mm fork springs and the ICS springs along with the

stock Ti spring off the shock. I think its a 4.9 kg/mm.

Thanks, Jason

Share this post


Link to post
Share on other sites

I'm in need of stock .44kg/mm fork springs and the ICS springs along with the

stock Ti spring off the shock. I think its a 4.9 kg/mm.

Thanks, Jason

I'm pretty sure I have TI rear spring, but it's off a 250 or 450F. I'll have to look up the spring rate and let you know. I think it's 5.1 or 5.3.

Edited by j-bo

Share this post


Link to post
Share on other sites

I'm pretty sure I have TI rear spring, but it's off a 250 or 450F. I'll have to look up the spring rate and let you know. I think it's 5.1 or 5.3.

I would be very interested in the 5.1 if the OP does not want it.

Share this post


Link to post
Share on other sites

The TI spring I have is a 5.1...looks pristine.

Since OP is looking for a 4.9....1st come 1st pay (paypal) 1st serve. :smirk:

PM or email: jbomx@hotmail.com

Edited by j-bo

Share this post


Link to post
Share on other sites

i am pulling off the stock springs and shock spring from my 05 yz250 il see what they are and if theyl work and you can have them

Share this post


Link to post
Share on other sites

I have those. I took them off of my bike that I would have to guess only had about 30 hours on it.

And it is exactly a 2007 YZ250

Share this post


Link to post
Share on other sites

I have those. I took them off of my bike that I would have to guess only had about 30 hours on it.

And it is exactly a 2007 YZ250

I could use a set of OEM fork springs from a 2007 YZ250. If you are sure they are the originals as that's one of the years they used the .43. I'm not sure how you could tell if anyone swapped them previously though. Do they have any markings on the ends?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...