Jump to content
Sign in to follow this  

05 CRF450R stalling when clutch is in and lock the rear brake

Recommended Posts

When my bike is on the stand (warm) I will shift into first gear and let the chain spin. Sometimes when I tap the rear brake (clutch fully in) it decides to stall. I have stock jetting with the fuel screw 2 1/4 out (sea level/ orlando fl) too rich??

I have the fear of hitting a big jump and stalling mid flight if I tap the rear brake.

Share this post


Link to post
Share on other sites

clutch is sticking. change the tranny fluid, but before you refill it remove the side cover, the pressure plate and remove all the plates. Seperate them, clean them, reoil them and reinstall. Replace if needed and also inspect the basket to see if it is notched.

Share this post


Link to post
Share on other sites

When I reassemble the pressure plate, do the six bolts that hold the springs have to be a certain torque. I do not have a good torque wrench for low torque applications. example 0-20 ft lbs

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...