Asked this question on ktmtalk but got nothing.... Wondering if anyone has some ideas or mods/fixes etc to decrease pressure build up in the WP CC forks. Noticed everytime i pull my forks down for a service/shim change, i check the bladder pressure before i release it and its up to 22psi, I normally set it at 16psi during assembly. I also normally fully compress the damper rod in before disassembly to check no air has entered the cart during operation on the bike... a fair amount of oil comes out the relief/poppet valve. So this increase in oil volume into the cart during operation must be bumping up the bladder pressure? I cant imagine this is good for fork performance and consistency, or is this just what they do and a transfer that happens to balance internal pressure/volumes out? Would it be worth while re-setting bladder pressure after the first 1 or 2 decent rides to the desired pressure or will it just build up again?