clutch draging exc 200

[apriliars250]

the other day my clutch started draging its not that bad to pull me along.when the clutch lever is fully in the engine some times stalls and i is ajusted all the way in on the clutch lever..

what could this be ?

[LiquidSilver]

This was happening on my Yamaha dirt bike, and became very annoying. I replaced the clutch pack and it's perfect now. Some of the plates must have become warped and worn over time.

I found replacing a clutch to be very easy. I was using OEM pieces, so it wasn't cheap, though. Aftermarket clutch packs are cheaper, but I stay with stock springs.

[apriliars250]

might give the clutch a bleed 1st

[gmoss357]

notched clutch basket or warped plates. I don't know how much bleeding will help. Also, if you are running a thick oil, that will also cause clutch drag. Does it happen when the engine/tranny is completely warm?

[apriliars250]

notched clutch basket or warped plates. I don't know how much bleeding will help. Also, if you are running a thick oil, that will also cause clutch drag. Does it happen when the engine/tranny is completely warm?

yeah it does happen when the engine/tranny is completely warm.not sure what gear oil im using becuse i have not replace it. i have not had the bike that long,,it did not do this when i first got the bike

[timmyp8823]

Sounds like its time to pull the plates and inspect them. Make sure none are warped or broken.

[apriliars250]

i have just blead the clutch..still does the same. so i will inspect the plates. but im going to buy new one if im going to take the old ones out

[gmoss357]

The Tusk kit from RMMC is nice, and a nice price.

[timmyp8823]

+1 on the Tusk kit.

[apriliars250]

only problem with tusk kit is that im from uk so it will be just over two weeks wait for postage..what i can get hold of is ebc clutch kit or from a ktm dealer

[timmyp8823]

There are CR125 plates that fit as well if Honda parts are cheaper than KTM parts. I don't know if they are or not,but it might be worth checking into if you go OEM.