Jump to content
Sign in to follow this  

Very quick GPR stabilizer question!

Recommended Posts

Is it possible to use a 7/8 top mount GPR stabilizer if I run a rather large riser (4") and cr high bend handlebar?

Did a quick search and couldn't find much... I just need a - yes... yes with mods... or no!

thanks!

Edited by VwDetour

Share this post


Link to post
Share on other sites

If I'm reading your question right........you're gunna mount that gpr 4 inches higher b/c of the risers.

I would guess that's ok......but you're gunna need a 4 inch longer post that can reach up to the arm on the gpr...make sense?

Share this post


Link to post
Share on other sites

Yea that's what I figured. Didn't think to phone GPR but realized they are on the opposite end of the continent so they were still open.

Fella I talked to said they don't offer a post that large it would just snap under pressure, but I can order under-the-bar style bar clamps and turn it into a V2, allowing me to run a bar riser without worry

thanks

Share this post


Link to post
Share on other sites

another update: looked over their product offering and see nothing about a V2 (under bar) listed for the dizzer... so all they offer for us is an over-the-bar solution, which is useless if you want to use a riser

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...