Jump to content
Sign in to follow this  

Breather hose fitting replacement

Recommended Posts

I'm talking about the 90 degree fitting which inserts into the valve cover on 07 TE's. I saw it a while ago (made of some metal), but forgot who makes them.

Share this post


Link to post
Share on other sites

I'm talking about the 90 degree fitting which inserts into the valve cover on 07 TE's. I saw it a while ago (made of some metal), but forgot who makes them.

Zip Ty Racing I believe, but their website is currently down.

Share this post


Link to post
Share on other sites

If it came loose or out and is not broken, Clean cover and fitting mix up some JB weld and stick it back together. Make sure you get the alignment right because once done won't come out or leak again.

If can't use stock clamp zip tie works fine screw type hose clamps tend to crush and distort it when it gets hot oil vapors going thru it.

Later George

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...