Jump to content
Sign in to follow this  

2012 ktm 50 sx

Recommended Posts

I have a heavy kid he weigths 95 pounds and the bike is bottoming everywhere, this bikes comes with a 2.0 nm spring and ktm offer 2.2 but they are not availabe anywhere!

This are usd forks, can I do anything with valving? or do I need to wait until the springs become available?

Share this post


Link to post
Share on other sites

Use the old method on the 50 fork, thicker oil

Share this post


Link to post
Share on other sites

How can I get this apart? I use a pin spanner and heat but I could not brake it loose!

ktm50.jpg

Share this post


Link to post
Share on other sites

If those are peens you need to rap hard on them with a hammer, short sharp blows to break the threadlock, don't hit the part where its a empty tube!

Then heat again and it should come loose

Share this post


Link to post
Share on other sites

you can use the fork springs from the sx65 2012 - these are the same legnth - stock is a 2.8N - i can get you 2.4 or 2.6.

Can you shipped to Miami Florida?

Also in order to get the springs out I have to take the part in the picture out and I'm having problems with it

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...