Jump to content
Sign in to follow this  

Seat

Recommended Posts

Hello a newbie here, just purchased a 96 xr250l.(no pics yet) Love the bike but I need to trace some wiring under the seat.

Dumb question but how do you remove the seat? Does the rear fender have to come off with it?

Share this post


Link to post
Share on other sites

Remove bolt from each side raise slightly and pull seat toward back. You have alignment guide front bottom and at tank that must be ligned up when you reinstall.

Share this post


Link to post
Share on other sites

Dunno if im getting blind but dont see any bolts anywhere to remove it. (have side panels off)

Share this post


Link to post
Share on other sites

I have a 96 250L too!!!! just bought mine also! To remove the seat;

1. Side covers off

2. Remove the seat strap with 10mm socket

3. Look under the rear fender and inside it. You should see 2 identical bolts on the left and right (they might be a bit rusty)

4. use a 12mm socket and take those out

5. lift up on the back and push down on the front of the seat and then pull back it should come off

if you still have trouble PM me

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...