Jump to content
Sign in to follow this  

05-07 OEM service manual

Recommended Posts

Can someone please PM me with a 05-07 CR250 OEM service manual?

I loaned my manual to the local race shop last week as they work on my bottom end and I need some info this weekend

Thanks

Edited by AXAxiom

Share this post


Link to post
Share on other sites

Only have it in hard copy but if you tell me what you looking for and I can see if I can help.

Share this post


Link to post
Share on other sites

Only have it in hard copy but if you tell me what you looking for and I can see if I can help.

Thanks ryanmac,

I just need info on the cylinder hardware installation, I'll use item numbers so you can refer to the parts breakdown

http://www.cyclecent...=2005&fveh=3276

Head stud torque and do I use thread lock? Item 9

Exhaust flange Torque? Items 8,18

http://www.cyclecentralpowersports.com/fiche_section_detail.asp?section=138929&category=MOTORCYCLES&make=HONDA&year=2005&fveh=3276

PV nut torque? Item 12

PV seal retainer torque? Item 13

PV Cable holder torque? Item 14

Thanks again, I really appreciate it!

Edited by AXAxiom

Share this post


Link to post
Share on other sites

Cyl. stud 9 lbs.

Exh. fl. bolts 6.6 lbs.

the rest 7 lbs

I just put a complete with cylinder top end and only torqued the head bolts. (20#)

I used a very light grease coating on my studs to make sure there was no drag getting them to seat all the way.

Share this post


Link to post
Share on other sites

Cyl. stud 9 lbs.

Exh. fl. bolts 6.6 lbs.

the rest 7 lbs

I just put a complete with cylinder top end and only torqued the head bolts. (20#)

I used a very light grease coating on my studs to make sure there was no drag getting them to seat all the way.

Thanks for your help

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...