no play in clutch

Hi ,

I am new to thumper talk but Ive been on dirtbikes for a good while now. I feel like the problem is probably staring me in the face but I need some help.

I have a 2011 yzf 450 I race and ride a lot. The clutches were starting to slip and I put a EBC clutch kit (plates fibers springs) in it.

ive replaced clutches in the past and did nothing different on this set. After i was done i rode it around the block and everything seemed ok. after a couple motos on it, it was constantly getting more play in the clutch lever and i was constantly adjusting it. i know when you put a new set of clutches in you are supposed to give it plenty of play so that you dont burn the new set up......that being said now I cant get any play in that clutch lever. The quick adjust is all the way in and so is the free play adjustment on the cable itself. there is no slack in the line what so ever. What to do now?

Thanks

If you pull the clutch apart, you'll probably find that the plates are thinner than spec'd, in which case there's only one thing you can do.

This is the first time I have ever tried the EBC clutches. that could be it

This is the first time I have ever tried the EBC clutches. that could be it

I didn't want to say that in an undiplomatic way. Quite a bit cheaper than OEM, were they?

well not that they were a whole lot cheaper, i just waited until the last minute and couldnt get all the oem set in on time so ebc was the last resort. kicking myself in the a$$ now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now