Jump to content
Sign in to follow this  

how to set timing?

Recommended Posts

2004 Kx250f took cams out now need to know how to place them I'n and which marks on the flywheel to line up with the two notches on the hole you see the flywheel thru, does anyone have a pic or video? Any thing will be apprrciated !!

Share this post


Link to post
Share on other sites

i like to pull the spark plug out and put a small screw driver in that hole and when the screwdriver is at its highest point, i know im at TDC. then i line the cams up with the head, i was told that the exhaust dots will be slightly to the right instead of straight up and down and sideways, and the intake cam is dead horizontal and vertical. hope this helps!

Share this post


Link to post
Share on other sites

When turning the crank left (CCW) it´s the second mark coming up in the hole. The first one is a just a timing mark, the second is TDC.

kxfcamtiming.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...