Jump to content

Double G

Members
  • Content Count

    167
  • Joined

  • Last visited

About Double G

  • Rank
    TT Bronze Member

Contact Methods

Profile Information

  • Gender
    Male
  • Location
    Tennessee
  • Interests
    I restore and sell Vintage Mini's with FREE shipping to the lower 48 states. Check out my website for colors and pricing.
  1. Double G

    PW80 clutch: 6 springs in 8 holes?

    Just noticed this was a 2 year old post! Great INFO. Thanks
  2. Double G

    PW80 clutch: 6 springs in 8 holes?

    I ended up taking the center ball out of each group of 3 to get a total of 8 balls for a 175 adult rider. Also if you rough up the steel plates between the clutch disc it helps them grab better. I just rub each side on the concrete to get a rough texture on both sides.
  3. Double G

    PW80 clutch: 6 springs in 8 holes?

    I'm trying clutch mod now, what the best spacing for 8 balls?
  4. Double G

    Trx 700xx

    I have been on quads and dirtbikes for many years and I just picked up this beast and am selling my KFX450R today. I have the Razor now and this sport quad, what else does a man need??
  5. Double G

    Seat

    durelleracing.com has the cut down seat cover and foam, it rocks
  6. Double G

    07 crf250r

    If there is low hours you will be able to tell, it will have factory tires, grips, controls. Then it should look new, right? my 2 cents. . tell him to get it ready to ride and pay the 2500 or sell it to ya for 2000 like it is. 2500 is book for a running bike. Around here you can find a like new bike for 2500. My buddy picked up a leftover 07 this time last year and had 4 rides on it and sold it last week for 2700.00. Oh I forgot to mention it was a 450.
  7. Double G

    07 crf250r

    2500.00 is fair market on the bike, Look in their garage and you can tell alot about the seller. If they take care of the other bikes chances are they took care of that bike. Ask how many hours THEY think is on the bike, how often the oil was changed then check the oil. If you catch them in one lie there are more to come .. .
  8. Double G

    07 crf250r

    I just picked up an 07 for cheap (1500.00) with 2 sets of plastics and a set of new tires not on the bike. Just came off a CR250 set up for the woods. Stock bike that started well hot and cold which is a good sign. Valves had just been adjusted the seller told me. This is what I found. The rear wheel bearings were shot and most the spokes were loose. Radiator tweeked some but not leaking, forks did not seem to have the correct action. What I am saying is these bike require attention from day 1, book sez a new piston every 15 hrs. I am in the process of installing a 08 piston (100.00), stage 1 hotcam I found for (75.00) changing the oil and coolant and installing a hour meter. Rebuilding the rear shock and the the forks, installing a smaller leak jet (55) and a extended fuel screw. This way you know what you have from day 1. The hour meter makes the bike worth more if you do plan on selling down the road. 500.00 above the asking price and you can ride it like its new. Now for 2 grand I have a great bike setup the way I want it. I will keep you posted on what I find when I open her up. Enjoy
  9. Double G

    To Cam or NOT? Stage 1 Hotcam in Stock 07 ?

    Good advice. I just change filters after every ride. I keep 2 clean filters in bags and when I get down to the last one bite the bullet and clean em all.
  10. Double G

    To Cam or NOT? Stage 1 Hotcam in Stock 07 ?

    Lets go back to the backfire screen, I am convinced that I need to put it back in but what else can i do to make that filter seal to the airbox well? In a cheap way. Same thing on my 05 CR250. It did not seem to seal well to the box. I just grease the heck out of the lip and cleaned after every ride. On my quads I used the pro billet setup for a better seal. I saw some seals that you use each time, do they work?
  11. Double G

    To Cam or NOT? Stage 1 Hotcam in Stock 07 ?

    That was what I was thinkin, and the stock duals dont sound bad. Always had to get a pipe on all my other bikes. Goin with the Race Tech Gold Valve on the rear, then the front. The springs seem to be ok for my weight so maybe I can make the R a woods bike after all.
  12. Double G

    To Cam or NOT? Stage 1 Hotcam in Stock 07 ?

    Cool, I ordered the 08 piston for my 07, using the stage 1 cam, removed the backfire screen, going with a 55 leak jet, 172 main, 42 pilot and stock exhaust and stock gearing. Just came off a 05 Cr250 smoker set up for the woods. I hope I can have as much fun on this 250! I will not have any problems running the 08 piston will I? For 11 bucks more I get slightly higher comp. I can get a full stainless yosi dual pipe for 300.00, should I do it or use that money on the forks and shock?
  13. Double G

    To Cam or NOT? Stage 1 Hotcam in Stock 07 ?

    That is what I was thinkin, I was hopin someone had the cam specs for my 07 so I can compare it to the Hotcam stick
  14. I am replacing the piston in my 07 crf250 with an OEM piston and was thinking about putting the stage 1 Hotcam in while I am at it. I ride woods, trails and dont race. Really trying to turn my R into a good woods bike. Rejetted, removed the backfire screen but stock. Would ya do it? The dyno chart on the site shows big gains down low but that is on the 06. 07 they made some cam and head changes, let me know. I got the cam for 75.00 bucks
  15. just had the stock system off my bike that I need to sell. I picked up a full stainless Yosi system off flea bay and wanted to get rid of stock unit. thanks for the input. just trying to offset the 300.00 I paid for the Yosi. 3 beans is a good deal and could not pass it up for a full system.
×