Jump to content

punkies7

Members
  • Content Count

    24
  • Joined

  • Last visited

About punkies7

  • Rank
    TT Newbie

Profile Information

  • Location
    Virginia
  1. anyone who lives in southeastern va or n.c needs to be aware that the state is trying to shut down the track in ivor known as mr t's hunt club. The cops, ATF, came and raided the track with police cars, hummers and a helicopter. They tried to make everyone leave and took the names of those who didn't. for those of you who ride here know this is a clean, safe family oriented track and we need to help to save this facility. The E.P.A. is involved and is saying that it is causing to much erosion,and must be leveled.This is one of the last places to ride in the area and please spread the word and write to your congressman about this and help to save Mr. T's hunt club. In the mean time continue to go out and ride there and enjoy it before the state of va steals another one of our rights.
  2. punkies7

    help changing fork seals.

    i am changing the fork seals on my buddies 05 rmz-450. i did it a few years ago on my 99 rm 125 and was wondering if someone could walk me through it and tell me how much oil is required in each fork.. thank you
  3. punkies7

    no front brakes

    were do i fill from? i tried this last night but couldn't get any fluid in because of the connector on the end of the hose. i also tried to fill from the bleeder port. (threaded the bleader fitting out) but couldn,t get the fluid to stay in the hose it just ran right back out. I had the cover off on top should that be on, or doesn't it matter. I appreciate the imfo.
  4. punkies7

    switch back to two stroke

    i switched to a 05 rmz 250 blew it up and will never own a thumper again. love my 05 yz 125. they can have their 4 strokes
  5. can anyone tell me a good way to get the air out of the front brake line. I have a 05 yz 125 and just replaced the fork seals and did a oil change. I figured while i was doing this i would change my brake fluid also. i bled all of the old fluid out and put new in but i cannot get them to build up any pressure at all. i remember doing this before and i simply opened the bleeder and bled them but this is not working. help....
  6. punkies7

    05 yz 125 fork seal replacement

    awesome thank you very much.
  7. punkies7

    05 yz 125 fork seal help

    how do i get the tubes seperated, so i can change the seal?
  8. punkies7

    05 yz 125 fork seal replacement

    thank you i will give it a try.
  9. punkies7

    05 yz 125 fork seal help

    where can i find a inner chamber socket? other than a dealer , and i do not have a book but i appreciate the help.
  10. i am trying to change my fork seals in my 05 yz 125 and am having problems getting the inner and outer tubes apart. I changed them in my 03 with no problem but there is no nut to remove on the 05 to seperate the inner and outer tubes. can anyone tell me how to get this apart?
  11. i am trying to change my fork seals in my 05 yz 125 and am having problems getting the innr=er and outer tubes apart. I changed them in my 03 with no problem but there is no nut to remove on the 05 to seperate the inner and outer tubes. can anyone tell me how to get this apart?
  12. i am trying to change my fork seals in my 05 yz 125 and don't know how to seperate them so i can do that. I changed them in my 03 with no problem but there is no not on the 05 to take off once i pull the tube down. can anyone help me. is there a special tool i need?
  13. my 01 yz 125 will not stay running. it will start `1 kick and idle fine. runs good until i really get on it then it completely shuts off. it doesn't bog or sputter just cuts off all at once. then starts right back up immedietely I cleaned the carb and all of my jets, wondering if maybe it could be electrical, and how to find out.....
  14. punkies7

    Is this a good deal?

    I have a 05 rmz 250 i have listed in the paper for $3000. Located in southeastern va.
×