Jump to content

2 STROKE YZ DOC

Members
  • Content Count

    14,052
  • Joined

  • Last visited

  • Days Won

    2

7 Followers

About 2 STROKE YZ DOC

  • Rank
    Get Help Now

Profile Information

  • Gender
    Male
  • Location
    USA
  • Interests
    YZ's of course.

Recent Profile Visitors

9,376 profile views
  1. 2 STROKE YZ DOC

    2003 YZ125 Top and Bottom End Advice

    Gotta be one or the other. That is way to much bubbles with a new gasket (properly torqued to specification) to not be warped.
  2. 2 STROKE YZ DOC

    Shifting problems-do i need to split the cases?

    I always just drizzle a little down each side.
  3. 2 STROKE YZ DOC

    Yz250 start shaft failure

    If you know a good machine shop the 02 up outer right case can be machined to the thicker shaft. I've done this mod on my personal 04, and a few restorations that guys wanted. No way to get to my parts bin, so I can't help you out with OEM parts. SIDE NOTE: I have never broken or even seen a broken shaft in person and I have been around many YZ250's in my years.
  4. 2 STROKE YZ DOC

    2003 YZ125 Top and Bottom End Advice

    Appears warped.
  5. 2 STROKE YZ DOC

    Suspension re-valving advice

    Arrogance can be indicative of technical excellence as well. Ive had good results from both super nice guys and not. I second the local tuner, the guy i just used is a mile from my house, very convenient. Just found out my neighbors dad works at Race Tech. Hmmmmmmmm, Said he can get me anything I need on the cheap. 💗
  6. 2 STROKE YZ DOC

    Yz250 the rebuil motor kit to buy

    OEM crank, main bearings, small bearing and seals. OEM top end gasket kit, and right gasket, water pump, and intake. Top end: Vertex piston or OEM, re-plate jug. I use PowerSealUSA
  7. 2 STROKE YZ DOC

    Yz 125 years... any warnings?

    My boys skipped the 125 and went to the 250. True, having to control a 125 will make you a better rider for the 250, and if you have the smarts you can get the 125, and get used to it for a few years, and flip it into a 250 as they will always be around. Expect to pay 1500 for 98-2001, and 1500 up for 02-04 (steel frame 5 speed), and 2500 for an 05 up.
  8. 2 STROKE YZ DOC

    YZ 250 Restyle Polisport Vs R-Tech?

    OEM, Polisports and Rtech will for sure.
  9. 2 STROKE YZ DOC

    Suspension re-valving advice

    Arrogance can be indicative of technical excellence as well. Ive had good results from both super nice guys and not. I second the local tuner, the guy i just used is a mile from my house, very convenient. There is a certain flavor you can feel out. If something needs to be replaced, would you call the customer or wait for them to call you? Then act like an arrogant a$$ about not needing to call because it was your repair and you should have followed up if you wanted your suspension done? That's the flavor of RG3. FOAD for all I care.
  10. 2 STROKE YZ DOC

    Suspension re-valving advice

    Depending where you are one must factor in shipping on top of the tuning. I have Enzo and RG3 real close and go to Enzo over RG3 anymore since I get them done with pleasant people. JFYI: Arrogance has always turned me away from companies. Look local as there are many places that will do a great job. Call, talk, explain, feel them out. It is the best mod you can do to "any year" bike.
  11. 2 STROKE YZ DOC

    Best YZ250 model years?

    Weld re-drill, or sleeve the pin, Iv'e only had one bike across my bench that had loose peg pins. Was a 99 YZ125, and she was rough.
  12. 2 STROKE YZ DOC

    Do I need a new bottom end?

    Just make sure you are supporting inside the flywheel housing where the bearing housing is when you pop it. That is because they do not support the housing as mentioned above. 220* But this is in new install, this one didn't drop all the way. exc: heat the case on a BBQ or with a torch and try not to heat bearing. If in a BBQ the case would heat faster than bearing, with torch just heat evenly around bearing then give it some taps with old bearing on top, just support it with chunk of 2x4 wood inside. Yes, I am stressing that safety measure.
  13. 2 STROKE YZ DOC

    Best YZ250 model years?

    That would be clinically called Autisdownrom9betes. Thought it was yours the way you be cracking the Aluminum frame debate. Realize, there is STEEL no debate.
  14. 2 STROKE YZ DOC

    Do I need a new bottom end?

    Freezer is all I ever done, then bring them out to the shop in their bag, packed in crushed ice. The love you give it, please do not hammer on it, press it in and use support on the back of the bearing housing, not just the outer case. Crack it, break it you going to want to cry.
  15. 2 STROKE YZ DOC

    Best YZ250 model years?

    I understand you very well. You don't like steel frame bikes. You like aluminum.
×