Jump to content

yz450fguy

Members
  • Content Count

    93
  • Joined

  • Last visited

About yz450fguy

  • Rank
    TT Member

Profile Information

  • Location
    Idaho
  1. Don't fly frontier anymore. They have teamed up with the Wilderness Society - A group out to close all our public land. You should all send letters to Frontier expressing your dissatisfaction!! Here is the news article link. http://frontierair.tekgroupweb.com/a...rticle_id=5263 here is a link to send your complaint! http://frontierairlines.custhelp.com...ontierairlines Thanks
  2. Don't fly frontier anymore. They have teamed up with the Wilderness Society - A group out to close all our public land:bonk:. You should all send letters to Frontier expressing your dissatisfaction!! Here is the news article link. http://frontierair.tekgroupweb.com/article_display.cfm?article_id=5263 here is a link to send your complaint! http://frontierairlines.custhelp.com/app/frontierairlines Thanks
  3. yz450fguy

    XR250R Enduro Project Using the Tusk Kit

    Very nice write up! Here are the videos Rocky put out for installation that may help too. i bought the tusk kit as well and have really liked it!!
  4. yz450fguy

    CRF and WR street legal kit

    The kit is a Tusk brand kit by the way, not Ryco. I hear those are good though.
  5. yz450fguy

    CRF and WR street legal kit

    I have had the kit on my WR for about 10 months now. I have beat the crap out of it too with over 1000 miles this summer (98% rough off-road). I love the kit! It passed inspection with no problems and the double-stick flush mount turn signals are solid. I will have to pry those babies off. The only problem I have had is the horn button was sticking. I had to take it apart and clean it, then it worked great again. I can say with confidence that this is by far the best kit for the money:banana:
  6. yz450fguy

    How do you change the brake pads?

    here is a brake pad replacement video on a honda. hope this helps. http://www.rockymountainatvmc.com/videos.do?videoId=87
  7. yz450fguy

    rear fender bag?

    I use the tusk fender bag too. it mounts easy with 4 bolts, nuts, and washers that came with the bag.
  8. yz450fguy

    license plate holder

    the problem is that most states require the plate to have a light shining on the plate. I am running a tusk tail/brake light assembly on my WR and my brothers CRF250x. It works great and doesn't use hardly any juice.
  9. yz450fguy

    04 CRF250x Int valves tight, Shim or not

    get those crappy stock intake valves out. My brothers CRF didn't last at all until we put stainless steel faction MX valves in. It has gone over a year without having to shim.
  10. yz450fguy

    headlight & taillight

    the lights simply unplug. you can put a 250r # plate on and a 250r Rear fender.
  11. yz450fguy

    2005 yz 250 pipe question

    o4 pipe is the same. you can actually fit a 99-10 on your 05.
  12. yz450fguy

    help...what is this part ??

    It is a spacer, but it is stock. They started putting them on in 2000 I believe. My 2005 has one as well.
  13. yz450fguy

    Which stainless brake line?

    I bought the Tusk brake line and it says galfer all over it. it works great. I have had it over a year now. No flex like the stock!
  14. I agree with scrode. Mine seem to leak every spring. I think the cold does something to them. I figure when they leak it is probably past due for new oil anyway. Fork seals are easy to change. There are lots of good how-to fork seal videos on the internet. this fork seal video is probably the best. I put tusk fork seals in last spring and they haven't leaked yet. I recomend them
  15. yz450fguy

    Video uploads/editing?

    I like vegas pro. Kind of spendy though. there are tons of cheap programs out there if you are just looking to dump the footage in and don't want to edit much. What about microsoft movie maker. that comes free on most PCs.
×