Jump to content

Teuton

Members
  • Content Count

    55
  • Joined

  • Last visited

About Teuton

  • Rank
    TT Member

Profile Information

  • Location
    North Carolina
  1. Teuton

    DRZ at the track

    Awesome pictures. I need to take my DRZ on the track. Anyone know if they allow Supermotos on the Kart track at CMP?
  2. Teuton

    DRZ at the track

    Anyone have any pictures of their DRZ in action?
  3. Teuton

    How fast can I go

    never gone faster than 80mph. Once I get to 65 I feel like the thing is going to explode any second.
  4. Teuton

    Botched 3x3?

    If its running fine I wouldn't worry about it. If its bothering you, I personally would find a piece of plastic to match that hole. Get some epoxy or pliobond and seal it up and start over new.
  5. Teuton

    SM Jetting problem.

    So I installed full Leo Vince exhaust with 3x3 mod and JD Jet Kit. Bike runs really good and idles fine. But after I ride for a while and pull up to a stop light or something it will idle high for like 10-20 seconds before settling back down. Any idea what the issue could be??
  6. ok Eddie, I got the bike all back together and shes running perfect. She idles fine, but after riding for a while and pulling up to a stop light, it always idles a little high and takes about 15 seconds to settle down and idle right. Any idea what the problem could be?
  7. Awesome thanks for the link. I see your also in NC. What set up are you running?
  8. So I'm in Charlotte NC at 750ft. Will be running full exhaust and 3x3 Now I've been doing some research and this is what I came up with. Main Jet: 160 Blue Needle: 4th position I also have Kintech Fuel screw 2.5 to 2.75 turns out. Is this correct? Thanks for any help
  9. So I'm in Charlotte NC at 750ft. Now I've been doing some research and this is what I came up with. Main Jet: 160 Blue Needle: 4th position I also have Kintech Fuel screw 2.5 to 2.75 turns out. Is this correct? Thanks for any help
  10. yea I loosed up the frame to give it some wiggle room and I took the tank off.
  11. good I hope so. Hopefully installing the Jet Kit will go smoothly.... BTW is there a trick to getting the carb out?? I literally yanked on mine for about 10 minutes before I got it out.
  12. Just did my 3x3 yesterday, going to pick up my Full Leo Vince today and installing it and JD jet kit tonight. How much power can I expect out of these mods? 3-4 HP?? Im so excited, Also just got new tires, race break pads, and steel braided brake lines. Going to my buddies mountain house up in Lake Lure for the weekend to ride:banana:
  13. Alright guys just did the 3x3 mod, took out my carb, and took of my stock exhaust. Going to pick up my Leo Vince tomorrow and my jet kit should be here by thursday. Ill let you guys know how it goes. Wish me luck....
  14. ok cool thanks so much for your help man
×