Jump to content

DRZBobbylee

Members
  • Content Count

    47
  • Joined

  • Last visited

About DRZBobbylee

  • Rank
    TT Member

Profile Information

  • Location
    California
  1. DRZBobbylee

    Need help jetting 05 CRF450X

    The idle is not smooth it's kinda lopey like an old hot rod but it also fluxuates a bit up and down but it dosen't stall. also while accellerating in frist gear about midway through it has a stumble. I have a 2004 CRF450R that I installed the JD jet kit into and that bike runs smooth with no stumble at all. is there some reason that I get very little to no effect from turning the fuel screw in or out? Bobby
  2. DRZBobbylee

    Need help jetting an 05 CRF450X

    Hi this is what I have done with the jetting, but it still seems to be off. here's where i'm at. 2005 CRF450X, sea level, temp 45-55 degrees, smog air pump removed, JD jet kit blue needle #3, 170 main jet, stock pilot jet, 65 leak jet, airbox top removed and sides opened up, backfire screen removed, pink wire mod and a Yosh TRC pro comp slipon muffler. the bike starts right up but idle seems kinda lopey. I can turn the fuel screw in and out but it dosen't seem to change anything. Help? any ideas? Thanks, Bobby
  3. Hi this is what I have done with the jetting, but it still seems to be off. here's where i'm at. 2005 CRF450X, sea level, temp 45-55 degrees, smog air pump removed, JD jet kit blue needle #3, 170 main jet, stock pilot jet, 65 leak jet, airbox top removed and sides opened up, backfire screen removed, pink wire mod and a Yosh TRC pro comp slipon muffler. the bike starts right up but idle seems kinda lopey. I can turn the fuel screw in and out but it dosen't seem to change anything. Help? any ideas? Thanks, Bobby
  4. DRZBobbylee

    Jd Leak Jet Kit

    I just got mine and it comes with 4 sizes of leak jets and instructions.
  5. Hi, Will I need to re-jet when I install a new Yosh TRC slip-on muffler? I have the JD jet & leak jet kits. just wanted to know if I need to set it up differently from how the instructions state. Thanks, Bobby
  6. DRZBobbylee

    Brand new bike jetting ?

    Hello, I just picked up my brand new CRF450X and I have already received my JD jetting kit for it and the JD leak jet kit. should I break in the bike first or do the JD jetting and the airbox mods first and then break the bike in. I know the bikes run lean from the factory thats why i'm asking wich way is better for the bike. Thanks, Bobby
  7. Hello, I just picked up my brand new CRF450X and I have already received my JD jetting kit for it and the JD leak jet kit. I've also got the air pump block off kit and a Yosh TRC slip on muffler .should I break in the bike first or do the JD jetting and the airbox mods first and then break the bike in. I know the bikes run lean from the factory thats why i'm asking wich way is better for the bike. Thanks, Bobby
  8. DRZBobbylee

    A yellow CRF450

    I got the acerbis yellow plastic kit from Chaparral. when I got it they said they only had 2 left, but that was 2 months ago.
  9. DRZBobbylee

    A yellow CRF450

    Lets see if this pic comes out.
  10. DRZBobbylee

    Fresh look for the 450.

  11. DRZBobbylee

    Trail tech kick stand, where to get one?

    Thanks, I'll check them out. Bobby.
  12. Anyone know where to get a trail tech kick stand for a CRF450 for a good price. Thanks, Bobby.
  13. DRZBobbylee

    How much trany oil?

    Hello all, I want to use a Ratio-Right to mesure the oil for the tranny. my question is, using the Ratio-Right what is the correct amount of oil to use. Thanks, Bobby.
  14. DRZBobbylee

    Which Yoshimura system?

    I'm running a S.S.Yoshi full comp system and I love it.
  15. DRZBobbylee

    head light and tail light removal on e model

    I took off all the lights and taped up the ends and left the key switch installed, but I always turn it off.
×