Jump to content

L A

Members
  • Content Count

    148
  • Joined

  • Last visited

About L A

  • Rank
    TT Bronze Member

Profile Information

  • Gender
    Male
  • Location
    Ireland
  • Interests
    Motocross
  1. L A

    Setting idle on a 2013?

    .
  2. L A

    2012 kx250f dies after 30-60 seconds

    A few people had said i could be the tip over sensor so found the tip over sensor, disconnected it, and put in back on, now bike runs fine, so must of been the tip over sensor. how could it of been not working? is that a common fault?
  3. i Have a service manual, found the tip over sensor, disconnected it, and put in back on, now bike runs fine, so must of been the tip over sensor. how could it of been not working? is that a common fault?
  4. where is the tip over sensor located?
  5. L A

    2012 kx250f dies after 30-60 seconds

    i have checked all connections and all seem fine.. when say put light on ECU what do you mean?
  6. 2012 kx250f dies after 30-60 seconds bike ran perfect all day yesterday, washed bike today, put new filter in, started fine, and idles good, but dies after 30-60 seconds, even when bike is at high revs, it cuts out, no bogging, just dies ? bike has never had this issue before anybody any ideas ? thanks
  7. L A

    2012 kx250f dies after 30-60 seconds

    yes the bike will run perfect for 60 seconds, then will just die, no bog, just cuts out i am assuming because i had just washed it ,water has got something to do with it, but cant figure out what
  8. L A

    2012 kx250f dies after 30-60 seconds

    yes oil level is good, I have checked all electrical connection for water and all are fine, could this be a TPS problem ?
  9. 2012 kx250f dies after 30-60 seconds bike ran perfect all day yesterday, washed bike today, put new filter in, started fine, and idles good, but dies after 30-60 seconds, even when bike is at high revs, it cuts out, no bogging, just dies ? bike has never had this issue before. anybody any ideas ? thanks
  10. L A

    What type of clamps for 12' kx?

    RG3 tripplr clamps, rock solid, my twin wall bars will snap before the clamps move
  11. L A

    Sold RMZ and bought 13 KX250f

    Northern Ireland == 6,700.00 GBP = 10,467.11 USD
  12. L A

    2012 fork service and seal question

    thank you for the reply,
  13. hey guys, 2012 kx250 f 25hours from new, forkseals have started to weep and forks could probably do with a service anyway. can anyone point me in the direction of a DIY guide on how to do the fork seals for the 2012 forks? Also, what should I replace when servicing them? Cheers
  14. hey guys, 2012 kx250 f 25hours from new, forkseals have started to weep and forks could probably do with a service anyway. can anyone point me in the direction of a DIY guide on how to do the fork seals for the 2012 forks? Also, what should I replace when servicing them? Cheers
  15. L A

    does rg3 make a clamp for 2011 kx 250f

    RG3 are 20mm, i had them on my 2010 and now on my 2012
×