Jump to content


  • Content Count

  • Joined

  • Last visited

  • Days Won


About NSF3537

  • Rank
    TT Gold Member

Profile Information

  • Gender
  • Location
    New Jersey
  • Interests
    camping, motocross, and spending time with my family
  1. NSF3537

    2013 programming options

    I sent my ECM to Eddie with a list of mods and type of fuel being used on my son's 2012 CRF 250 and a check for $50.00. One day turn around and not only does the bike run at its best now but it starts with one kick. Never did that before. I would definitely use him again.
  2. Thanks. Thats about what I added. Can you still put the amount required when stock or is it required to put the extra amount in.
  3. NSF3537

    2014 crf250r oil?

    I would not use a synthetic oil in your trans. Use a good 80w trans oil like maxima, Honda oil etc. I have had bad experience with synthetic in clutch area.
  4. nobody has a hinson clutch and cover on there CRF250r?
  5. Does anyone know how much more oil the bike will take with Hinson cover? I put 700 ml in which is approx. 23.5 oz. ran the bike let it sit for 5 mins. and no oil was coming out of the check bolt. I added more till it started coming out but I don't know how much I added.
  6. I got a sponsor offer for Kal-Guard for 45% off but I don't hear enough about it. I currently se Maxima 927 in 2 stroke and amsoil in 4 stroke. Have you torn down a motor yet after using this oil?
  7. Any good engine builder can polish transmission. Not cheap but improves shifting
  8. Crate motor, long block. They are complete new motors delivered direct and cost is not bad. Cheaper then rebuild
  9. NSF3537

    Aftermarket pipe for a brand new stock 2012 crf250r

    It will need to be resprung for your weight and and revalve for your level of riding.
  10. It's NOT. Look at the swing arm and linkage. There are other things also but that is the main thing. 04 and 05 had the rocker arm connected to swing arm. The swing arm would have the plastic plugs up front covering the hole where the bolt runs through rocker arm. You have no idea what you are talking about.
  11. NSF3537

    06 has oil in the air box

    I would remove the oil breather tube from air box. They make a by-pass tube and a plug to replace stock. That is a bad design in my opinion.
  12. That is not a 2005, I believe it's a 2003 or prior. I have a 2005, big difference.
  13. NSF3537

    What fuel to use

    Ok thanks guys. I will try cutting it if you think that will be ok. I will have it remapped also. Cutting will save me a ton of money, just don't want to damage motor.
  14. NSF3537

    What fuel to use

    OK. I may get a fuel controller like wiseco or vortex.