Jump to content

JPMartin86

Members
  • Content Count

    81
  • Joined

  • Last visited

About JPMartin86

  • Rank
    TT Member

Profile Information

  • Location
    Massachusetts
  1. JPMartin86

    Opinion on engine noise (Video)

    Well its been just shy of 6 months, sorry. Ive been quite busy, and missed an entire season of riding... My bike looks no different than how I left it off with you guys. I had a hard time getting the bearing out of the sprocket side case. A buddy of mine was able to knock it out by baking the case first. Thank god for him because I was perplexed... Today I was able to install all he case bearings I had. Turns out Im missing 3 bearings. Those are ordered and will be in later next week. Hope to have the bike up and running before the snow accumulates...
  2. JPMartin86

    Opinion on engine noise (Video)

    7 buisness days. Hes really good.
  3. JPMartin86

    KTM 250 SX build

    Frame looks mint, wheels look great, cant wait to see the final product!
  4. JPMartin86

    Opinion on engine noise (Video)

    Ive got the water pump kit, full gasket and oil seal set. I have ordered all the bearings for the transmission and crank, new wiseco clutch basket, new pro-x clutch boss. Ill need to get 2 clutch plates and discs, clutch cushions and then ill be done!
  5. JPMartin86

    Opinion on engine noise (Video)

    I also got my cylinder back from Millennium Plating, I cant even believe they were able to fix the cylinder. It looks better than new! Ive put the power valve assembly back together...
  6. JPMartin86

    Opinion on engine noise (Video)

    Just got my crank back from Cooksey, what a great guy, awesome work and turn around time. He sent back the old parts. You can see the lower bearing was bad and causing the noise....
  7. JPMartin86

    Opinion on engine noise (Video)

    Heres a close up of the clutch basket.... I was able to split the case over the weekend. Cooksy is going to rebuild the crank for me, Ill have that sent out with in the next couple days.
  8. JPMartin86

    Opinion on engine noise (Video)

    Well since im rebuilding half the motor anyways i might as well start new with the clutch as well. Prices on the Barnett clutch basket aren’t that bad. Looks like the fingers have replaceable sleeves on them.
  9. JPMartin86

    Opinion on engine noise (Video)

    Thanks for all the help. Pulled the clutch cover off the other night and found some grooves in the clutch basket and clutch hub, haha! Im scared to look any further! This just got really expessive and quick. Priced out..... Replate, top end kit, crank rebuild, full gasket and seal kit, water pump rebuild kit, clutch basket, clutch hub, clutch plates and discs, couple of trans bearings, nuts bolts, odds and ends $1200ish!
  10. JPMartin86

    Opinion on engine noise (Video)

    Is one a euopean spec vs American?
  11. JPMartin86

    Opinion on engine noise (Video)

    Does anyone know the difference between the OEM Piston Kit I and OEM Piston Kit II?
  12. JPMartin86

    Opinion on engine noise (Video)

    Thank you, Ill look into them!
  13. JPMartin86

    Opinion on engine noise (Video)

    I was able to get the top-end off last night. The pistion is ovbiously trashed, looks like the cylinder will need to be sent out, theres a small crack near the power valve. Anyone use Meleniumplating.com? Does Cooksy do anything with replating? Contact email for Cooksy? I cant signup for KTM Talk (I have a free email account). Looks like the bike might have been loading up a bit, suppose ill have to ride faster in the trails..... Are the ware marks on the crank normal? Seems like there is a lot of side to side play, can say there is much of up and down play.... Would this be considered a lot of blow by?
  14. JPMartin86

    Swap old plastics for new look on ktm?

    That clutch cover sticker is brillient! I need one stat! I suppose youd need to grind down the KTM logo to make it fit good...?
×