Jump to content

HORSEPOWER35

Members
  • Content Count

    146
  • Joined

  • Last visited

About HORSEPOWER35

  • Rank
    TT Bronze Member

Profile Information

  • Location
    Colorado

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. HORSEPOWER35

    Drive Sprocket Install Help Needed

    I would not trust revzilla on fitment. Look on fox's website and cross reference part #'s or just call fox.
  2. HORSEPOWER35

    2018 WR450F ECU/GYTR

    According to yamaha it's neither rich or lean on the fuel and it's neither advanced or retarded on the ignition. It's neutral, a good safe starting point for creating other maps.
  3. HORSEPOWER35

    2018 WR450F ECU/GYTR

    Yes the comp ecu and throttle screw make it the bike it's supposed to be. All zeros is the stock map on comp ecu and is pretty darn good.
  4. HORSEPOWER35

    2019 Yamaha YZ250F Reviews?

    First ride in a month yesterday, due to snow. Tried a 49t rear and definetly like it better than stock 50t. Rode @ 6300ft.
  5. HORSEPOWER35

    2019 Yamaha YZ250F Reviews?

    I have the guts tall-firm and love it. I am also 6ft with legs of a 6.2 weigh 180 pounds
  6. HORSEPOWER35

    2019 Yamaha YZ250F Reviews?

    I'm waiting for keefer to do his exhaust review on this bike. I do know the dr d is the shortest and best looking. Have read that it is still as loud as stock.
  7. HORSEPOWER35

    2014 Yamaha 2014 wr450f. Want start

    Does'nt surprise me, I have a 12 wr 450 and a 19 yz 250f. Both suck with the electric start! Try turning idle up about 8 clicks and put choke (or whatever it's called on a four stroke) on, then try the button.
  8. Exactly my point, hey we can all still have fun.
  9. Hum that is your opinion. Not worth much except to you.
  10. Can't help you with your question but it's nice to see someone else on the same page as me.
  11. HORSEPOWER35

    YZ250X more overrev

    Yep! Personally I hate a wide ratio tranny offroad. Whether it is a 2 or 4 stroke, 250, 450, whatever. Add elevation to the equation, say 9000ft where I live and ride. No likey!
  12. HORSEPOWER35

    Yzf450 battery

    As I would expect! 150 ca. Even says 90 ca in the manual that came with it. Will be sending back tmrw.
  13. HORSEPOWER35

    Rekluse Models

    I'm looking for any input from cx users on a 19 yz 250f. Anyone out there???
  14. HORSEPOWER35

    Torquing triple tree clamps

    This I did not do, only lubed the threads.
  15. HORSEPOWER35

    Torquing triple tree clamps

    Hmm, interesting point. Many yrs ago my riding buddies and I had this same conversation, so I decided to do an experiment. I did my experiment on the front and rear axel bolts not the triple clamps but same results I'm sure. On a 11 yz 450 I marked the location of both f and r axel nuts to the adjuster block in the r and the fork lug in the f when properly torqued. The results were exactly the same location. I compared dry clean threads to greased clean threads. Same same! I was entrigued to say the least. Keep in mind if you have dry dirty oxidized threads and then compare to greased threads you might get different results. My experiment was comparing dry clean threads both on the nut and axel to clean greased threads on the nut and axel.
×