Jump to content

x400racer

Members
  • Content Count

    75
  • Joined

  • Last visited

About x400racer

  • Rank
    TT Member

Profile Information

  • Location
    California
  1. x400racer

    Headlight does not work...help

    I have checked the plug and harness behind the light. I also have checked the bulb. There is no power to the light or plug. The bike is charging when running. Based on what i can see from the info I have there is a open in the harness to the headlight.
  2. x400racer

    Headlight does not work...help

    I have a 05 450x and the headlight stopped working. There is no power to it. The tail light still works. Any ideas?
  3. x400racer

    TE310 from an XR400

    I just bought a 2010 and took it out this weekend. I was riding a drz400 before. Here is a few things I have learned about this bike. With stock gearing you will not want to take this thing on many highway rides(not geared for it), very little low end torque but once you start to rev it, the fun starts. If you dont like to rev,clutch or ride aggressive on your bikes then maybe not a good choice.
  4. Who is going to race the 6hr endurance race at glenhelen? We raced it last year on a 1981 yz465 and had a lot of fun. This year we might race the 465 again and a modern bike team.
  5. x400racer

    Guts comfort seat?

    here is the 08-10 seat
  6. x400racer

    Guts comfort seat?

    Our 08-11 seat will be done in a week and a half. I will post a picture when done.
  7. x400racer

    Guts comfort seat?

    seat concepts. there is a huge feedback of the drz version on the drz400 thread
  8. x400racer

    Guts comfort seat?

    We just finished a comfort seat for the KTM, here is a picure.
  9. Seat Concepts has a comfort seat for the 690 now.
  10. x400racer

    A new DRZ400 seat on the market

    On the tall seat don't worry about pulling the cover tighter. The foam on the tall seat is softer and will not make the seat too firm.
  11. x400racer

    A new DRZ400 seat on the market

    We are backed up right now with all the dual sport seats and a back log of vintage seats. I own a ts185 but got lucky the seat was in good shape. Check ebay for the 185 seat. There was a NOS one on there from china or so.
  12. x400racer

    How good is the wr250r/x seats?

    Sarah, We will look into making a low version in the future. It may be a few months because we are trying to get a lot of other models done. HK416, we are almost done with the 05-07 ktm seat, I also owned one of these bike so i have felt your pain.
  13. x400racer

    How good is the wr250r/x seats?

    Alright, got my seat done. Here is a picture.
  14. x400racer

    A new DRZ400 seat on the market

    the standard seat is around 1/2-3/4 inch thick at the rear and the tall is around 1 3/4 inches thick. The foam density is not much softer than the standard so you should not have a problem falling into the foam. Or stick with the standard foam. I can have the density changed also on your seat.
  15. x400racer

    A new DRZ400 seat on the market

    jere, the tall would be the best. I think the standard seat would be a little better than the low but not much differance at the very end of the seat. Hope this helps.
×