Jump to content

6cSumo

Members
  • Content Count

    90
  • Joined

  • Last visited

About 6cSumo

  • Rank
    TT Member

Profile Information

  • Location
    Indiana

Recent Profile Visitors

120 profile views
  1. 6cSumo

    possibly cdi weak?

    About 400 ft
  2. 6cSumo

    possibly cdi weak?

    What jetting are you running? Right now I've got 158 main, emn clip 3, and 45 pilot. No pilot air jet
  3. 6cSumo

    possibly cdi weak?

    at the beginning of the riding season I installed the 50hp package on my 06 sm. My brother has a stock 09 sm with only jetting, 3x3 and a slip on. His bike is just as strong as mine which is extremely irritating considering the money I just threw at mine. I've been dealing with a bad bog when I crack on the throttle. doesn't matter if its low, mid, or high, it just doesn't have the snap it should. I just installed a R&D powerbowl on my fcr-mx to try and tune the accelerator pump a little more since I suspected a rich bog from the AP squirt. I was able to make it a little better than what it was by adding a leak jet and leaning it out some but its still not where it should be. We got our bikes around the same time and at one time we had the same mods and his always ran way stronger than mine did. I'm trying to think if there is anything I may be overlooking that may cause a lack of performance. Is there any way it could be the the cdi box could be just worn out or weak? I don't have any issues starting the bike or any issues with lights being dim. SOMEBODY SAVE ME!!! If I cant get this figured out, I may have to sell my beloved drz and switch to a 2013 wr450f...
  4. 6cSumo

    hotcams causing bog?

    No. My neighbors probably hate me. Lol
  5. 6cSumo

    hotcams causing bog?

    I am around 400 ft I believe.
  6. 6cSumo

    hotcams causing bog?

    I've got th Fcr mx so Idk how much that would change the jetting from a slant Fcr. I need to get a handful of pilot jets and start messing with that.
  7. 6cSumo

    hotcams causing bog?

    This is what I was thinking mine was doing but everyone has been saying 45 should be right. I'm gonna have to give that a shot. I've tested with airbox door on and off. With the needle on clip 4 and the door off it seems to run best all around. I was debating on an adjustable leak jet cuz it seems like its making it too rich when it squirts.
  8. 6cSumo

    hotcams causing bog?

    I've played with the ap timing quite a bit trying to get the bog to go away. I was running an emn needle clip 3 and the bog was pretty bad. Went to clip 4 and it seemed to do a little better all around. 200 main air jet 158 main No pilot air jet 45 pilot jet I've verified the squirt off the bike to just miss the slide. It still feels like it bogs during the squirt but I can't figure out if its a lean bog or a rich bog. I really don't want to have to buy a wideband to get this figured out if I don't have to. Seems like once the squirt is done, it catches up to itself and pulls strong.
  9. 6cSumo

    hotcams causing bog?

    I've got the 50hp package and I've been fighting it trying to get rid of the bog in low and midrange that comes when I twist the throttle. The ap is wired and I've adjusted the squirt timing but it just doesn't have the torque that I think it should. I usually ride midrange rpms on the street only. Just goofing off and doing wheelies. Would it be a good idea to try the stock cams to give it more midrange and low-end torque or would it be a waste?
  10. 6cSumo

    FCR bog/jetting

    I just went through the same issue after my big bore and eddie suggested I try turning the screw in on the ap and it helped alot on mine. I'm still tweaking on it trying to get everything perfect but switching mains won't change it. try turning the screw in a half turn and see what that does for ya.
  11. 6cSumo

    50hp package jetting question

    It'll be uncorked. I'm not sure what's in it right now cuz I ordered it from epic and they did the jetting.
  12. 6cSumo

    50hp package jetting question

    Sweet. Seems a lot simpler than I expected lol
  13. 6cSumo

    50hp package jetting question

    thanks! any idea if I would need to change needle position or anything else? i just remember how much of a pain in the ass getting the fcr in and out of the bike was the last time. lol.
  14. I just ordered mrd/ssw, cw big bore kit, and stage 1 hotcams. I've already got the fcr and 3x3 mod. I've been trying to find out what jetting set up I would need to run with this but i'm not having any luck finding anything. I'm at 400ft above sea level. Also, are most of you guys buying a whole jet kit for the fcr or just certain jets and needles? I was trying to find an fcr jet kit on the tt store but wasn't finding one.
  15. If it makes you feel any better eddie, I just ordered some parts from you yesterday for my build and I will be sending my head in for a valve install as soon as I get parts in and the bike apart.
×