Jump to content

Anthony3358

Members
  • Content Count

    16
  • Joined

  • Last visited

About Anthony3358

  • Rank
    TT Newbie

Profile Information

  • Location
    Pennsylvania
  1. A train on the other side of the creek from the old railroad be filled with copper heads in volant pa didn't hang around to long and have never went back kind of an Erie feelin like someone died there
  2. A train on the other side of the creek from the old railroad be filled with copper heads in volant pa didn't hang around to long and have never went back kind of an Erie feelin like someone died there
  3. Anthony3358

    2002 250ex lifters

    How hard is it to change lifters aka cam followers on a 250ex an where can I buy them besides honda and still have good quality. My mechanic told me his friends been riding his like that for years which I'm sure would be fine but I can't stand the noise anymore and no it's not the valves, cam chain or exhaust making the noise the valves were adjusted yesterday and this motor does not have an over cam and the exhaust is a full t4 system no slip on crap
  4. Anthony3358

    300ex vs warrior!?!?!?!?

    300ex by far honda are reliable almost bullet proof and there are a ton of mods for Hondas just not a 250ex sadly I picked one up dirt cheap that was Cherry only to find out i couldn't big bore or stroke wanted to make a sleep you never see them built now I know why
  5. Anthony3358

    2002 250ex lifters

    Ok I had the old valve tic going on so I adjusted my valves and it sounds way better but I still have this annoying noise that kinda sound like a moderate valve tic but isn't to bad just annoying which I came to find out is my lifters which are a pretty common problem the question is how hard are they to change ? do not post and say its a cam chain these motors do no have and over head cam and it has recently been checked anyway
  6. Anthony3358

    2002 honda to 250ex

    Ok lets start from the beginning here I had the old valve tic going on so I adjusted the valves into spec but I came to find out my lifters aka cam followers are going bad has anyone had this issue and if so how hard is it to fix I really just don't wanna hear it anymore and no it's now the cam chain these motors do not have an over head cam Wrong forum but if anyone knows please help
  7. That's just my toy for me and my daughter hahaha said if you owned a four stroke not why else you owned What*
  8. Me 250ex poweroll big bore ported polished jeted t4 pipe modes air box uni filter
  9. I went to change my rear brake pads and there was gear lube in the brake case what should I do ?
  10. Anthony3358

    250ex gear oil in with brakes

    I'm no quad mechanic so please no ignorant comments
  11. Anthony3358

    250ex gear oil in with brakes

    I just changed the gear lube in my 02 250 ex went to put rear pads on and there I gear oil in with the brakes is this normal or is something wrong
  12. Anthony3358

    250ex wheelies

    Any other suggestion to just tryin to troubleshoot this thing now
  13. Anthony3358

    250ex wheelies

    That'll be my next thing to check
  14. Anthony3358

    250ex wheelies

    It was ported polished an jetted after a t4 pro circuit pipe was put awhile back it cuts out 90% of the time in a wheelies but doesn't do it on steep hill climbs could you some suggestions on what else to check
×