Jump to content

deafrider250f

Members
  • Content Count

    153
  • Joined

  • Last visited

About deafrider250f

  • Rank
    TT Bronze Member

Profile Information

  • Gender
    Male
  • Location
    Michigan
  1. I use the afx-41ds.... No more goggle's and has a built in dark tinted lens for them super sunny days...best thing about the helmet is you don't need to tilt your head down a lil to deflect roost...this helmet let's me keep my head up and plow thru the roost...the lenses are tuff and don't scratch easy...you can use goggles if you remove the lenses...
  2. Do you have a deer head on a mount? If so have bambi use the helmet...
  3. Wall trophy... There will be more to add to the collection over time...
  4. You can always find an engine relocation bracket kit to till the motor forward to the traditional position..I believe when Yamaha tilted the motors back the bike became more "neutral" in the corners...
  5. Bad coil,spark plug wire or the spark plug boot, bad kill switch, dirty air filter, bad stator, cracked air boot, bad o-ring on carb like the fuel screw one, worn cam chain or tensioner, woodruff key getting lose, wrong jetting...this is all a shot in the dark...
  6. I'm okay on the sound clip... It would not do me any good unless I watch it on the IMAX sound system for example....
  7. You can swap out the wr piston for a yz piston...you can also swap out the wr cams for the yz cams...if you go with the cam swap you will need yz jetting specs...if you just swap out the piston, no jetting is needed...I'm gonna be doing a yz piston swap during winter...
  8. i wish I could hear some of these noises most people hear... And it sucks to have a yami in the ER...
  9. Looks like the powerflow plastic goes over the bottom quick turn like a cover...Looks like you will have to remove the powerflow to reach the bottom quick turns...
  10. I'm gonna assume cycra will make the powerflow shrouds to go on and off like OEM...I have yet to see cycra say you need a differ bolt kit or vice versa to use " our " plastics...
  11. Screwdriver (not the drink)...or a punch or pliers or your fingers if your surperman...
  12. Cycra powerflow plastics are not OEM replicias...they are made that way to enhance the air flow to the air box and or enhance the air flow over the rads...I'm gonna assume you change your air filter as you normaly would with the OEM plastics...if you want stiffer OEM style plastics I would go with acerbis...I can't help with the " stuck boot" problem you have...
×
×
  • Create New...