Jump to content

AJBFire

Members
  • Content Count

    27
  • Joined

  • Last visited

About AJBFire

  • Rank
    TT Member

Profile Information

  • Location
    Massachusetts
  1. When I turn idle screw in it makes bike start easier when it's cold
  2. Also what would it mean if when I turn idle up this thing starts as it should cold
  3. QS3 directions also say to adjust ap timing screw to .115.
  4. I was also told by JD jetting to set QS3 to 3 turns out because they are off.
  5. I had a chance to test things out today. I put a 182 main in. 45 pilot. Bike was backfiring on deceleration. Tried a 185 also and it's backfiring too. Set need to 2nd spot also since last post. Seems better in mid but 0 to 1/4 throttle it cuts out.
  6. AJBFire

    crf250r bad bog when wrapping the throttle fast

    When installing the quickshot 3 it states to set screw at .115 and a gauge is provided
  7. I bought some smaller main jets to try and I have a 45 pilot jet to try also.
  8. AJBFire

    crf250r bad bog when wrapping the throttle fast

    What is stock ap timing for the 2008 crf250r. I installed QS3 and it gives you gap tool for .115. now bike starts great but cuts out and sputters as i hit throttle.
  9. I bought the athena big bore kit for my 2008 CRF250R and was curious to know what people have used for jetting set up. I'm located in Central Massachusetts. I have a stock exhaust and just installed quick shot 3. main jet is stock at 188, pilot is stock at 42. It finally starts like a normal bike but at about 1/4 throttle it cuts out. I have read a NMUU needle jet has been done and also going down on the main jet a size or 2. Any help is appreciated as I have searched and haven't seen much for the 2008 model.
  10. AJBFire

    CRF250R Cam Chain Guide

    Any thoughts on alumiweld or a product like that?
  11. AJBFire

    CRF250R Cam Chain Guide

    thanks any thoughts on alumiweld product?
  12. AJBFire

    CRF250R Cam Chain Guide

    Would the bearings need top be taken out in your opining or would it not effect them with a little heat?
  13. AJBFire

    CRF250R Cam Chain Guide

    Didn't know that piece was behind flywheel and the chain binded up and broke part of the hook piece off. Was attempting to get flywheel nut off.
  14. AJBFire

    Honda CR80RB Expert (2000)

    0 comments

    Good solid bike. Just had engine rebuilt. Plenty of power for my kids.
  15. AJBFire

    Honda CR80RB Expert 2000

    Good solid bike. Just had engine rebuilt. Plenty of power for my kids.
×