Jump to content

steveallen77

Members
  • Content Count

    11
  • Joined

  • Last visited

About steveallen77

  • Rank
    TT Newbie

Profile Information

  • Location
    Maryland
  1. steveallen77

    2008 crf250r stock chain

    I am in serious need of a new chain and sprockets and was wondering if anyone knew what the stock chain and sprocket sizes are?
  2. steveallen77

    Honda CRF250R (2008)

    0 comments

    Rebuilt head by fastheads. New renthal bars and grips. white front flares. one industries graphics.
  3. steveallen77

    Honda CRF250R 2008

    Rebuilt head by fastheads. New renthal bars and grips. white front flares. one industries graphics.
  4. steveallen77

    valve adjustment 2007 crf150rb expert

    Cheat*
  5. steveallen77

    valve adjustment 2007 crf150rb expert

    Thanks for the help Old plonker. Instead of taking the sprocket off the cam I was able to lift it gently and put at enough of an angle that I got it off. One shim fell on the ground and one scared me and disappeared but showed up in the spark plug hole. Also I found a way to cheer the timing chain tensioner. Instead of a vice just unscrew the flat head until it stops then give it one more little turn and it locks itself in place. May be helpful for you in the future to avoid the vice grips
  6. steveallen77

    valve adjustment 2007 crf150rb expert

    This is my first and last time I'm gonna work on it. Not worth 20 when I can just ask someone
  7. steveallen77

    valve adjustment 2007 crf150rb expert

    I am working on this bike for the first time. It is a crf150rb expert 2007. I have opened it all up to check the valve clearance which i believe is in-.006 and ex-.010. The intake is at .008. It starts and runs but it is a pain to start and feels like it has a on of compression. I can not figure out how to get to the cam buckets to replace the shims. Need help taking off the cam.
  8. steveallen77

    crf150rb tp dead center

    Im doing some work on my buddies bike and ive done valve jobs on my 250 before but i can't figure out how to put the cam at top dead center with the 150's head being different. Can anyone tell me how to find it?
  9. steveallen77

    2008 crf250r head rebuild

    I sent my head out to get rebuilt by fastheads and they gave me back a bag of parts to reassemble and there is a piece that looks to be two washers but it''s connected by a piece of metal. I can't figure out where it goes. Iv'e tried to put it on the exaust lifter with the pin that gore through and it doesn't fit. Any help?
  10. steveallen77

    2008 crf 250r throttle

    I have a grimy/ sticky throttle on my bike. I took it off cleaned the inside to little affect. It is not rubbing on the end of the bar. I'm pretty sure it doesn't have anything to do with the carb or cables. Anyone know what I should look at or clean? Should I buy a new throttle tube?
  11. steveallen77

    2008 crf 250r throttle

    I have a grimy throttle on my bike and I took it off and cleaned the inside with small results. Nearly positive it is nit the cables or the carb. Anyone know where dirt could have gotten or how to clean it out?
  12. steveallen77

    2008 crf 250r throttle

    On my bike i have a grimy throttle and I have taken it off and cleaned the inside and it helped a little but it is still sticking. I pretty sure ti doesn't have anything to do with the cables. Anyone know how to clean it properly or would I be better off buying a new one?
×