Jump to content

TOOPH

Members
  • Content Count

    21
  • Joined

  • Last visited

About TOOPH

  • Rank
    TT Newbie

Profile Information

  • Location
    Washington
  1. Is their any way to tell from the outside?
  2. Im going to look at an 06 klx250s with 12500 miles in 4 hours. The guy has only had the bike for 2 month... and well... the price is $2200. It looks like it was only ridden on the street. My plan is to put a big bore 351cc and pumper in tight off the bat. I was looking at the pictures and noticed a JE piston sticker on the bike... i didn't make the connection before. What are the chances it already has a big bore in it? Do they make 250cc replacements from JE, or just the big bore. I'm getting a little excitedat the though that it could already have a portion of what I'm planninh to do to it. Ahhh!
  3. TOOPH

    Extra Spring? Help Identify Please

    I havent been able to identify the spring... but the bike is running perfectly. Thanks, for all the help... i'll update if i find out what it's for
  4. TOOPH

    Extra Spring? Help Identify Please

    Thanks! I looked through most of what i took apart. Nothing matches... i found it laying on the ground beneath the bike after i put it back together. It looks clean, and felt like it had a this layer of oil on it. I really hope it doesn't go to my DRZ.
  5. TOOPH

    Extra Spring? Help Identify Please

    The penny is shiny! It is the drz400 kicker version. Though, the main spring for that is about the size of a lemon
  6. TOOPH

    Extra Spring? Help Identify Please

    Sorry ... here's some better photoshttp://i1228.photobucket.com/albums/ee444/Lethalish/Mobile%20Uploads/20160419_045623.jpg
  7. TOOPH

    Extra Spring? Help Identify Please

    Just checked, no dice. Oil filter spring is silver and accounted for.
  8. Everything shifts normally now and i rode 20+ minutes home in 3rd and 4th without any other problems. I did my best to flush the center/trans case. Once i find out what tgis bonus spring http://i1228.photobucket.com/albums/ee444/Lethalish/Mobile%20Uploads/20160418_210200_1.jpg i have left over is from... I'll try to ride it. I'm really hoping im one of the lucky few. I'll check the oil filter after the first run.
  9. http://s1228.photobucket.com/user/Lethalish/media/Mobile%20Uploads/20160419_045623.jpg.html Can anyone identify this... left over spring? Took off shift lever, brake lever, right side cover, stator/cover and valve cover. Thanks,
  10. Update The clutch basket isn't missing anything. I took the valve cover off and every looks good on top. Any idea where else this could have come from?
  11. Thanks!Here's the picutres http://s1228.photobucket.com/user/Lethalish/library/Mobile%20Uploads?sort=3&evt=email_share_media&page=1
  12. I was doing a wheelie and i felt/heard a clunk coming from my lower engine area. Immediately i noticed that my shift lever was not returning to the middle position like normal. I'd push down, it would stay down. I pull up, it would stay up. inly 3rd and 4th were working... so i tode the rest of the 25 mile trip home that way. I pulled the case off and found a piece of aluminum stuck in the shift link area... i also noticed that my oil pump idle gear was missing a tooth. I pulled the chunk out and everything besides the gear looks good. I don't want to split the case. I already ordered the gear... should i be worried? Previous owner busted the clutch cover with the break lever... might be that? Idk. Asking for some advice. Thanks! HOW DO I ADD PICTURES?!?! Here's pictures http://s1228.photobucket.com/user/Lethalish/library/Mobile%20Uploads?sort=3&evt=email_share_media&page=1
  13. TOOPH

    DRZ400K3 Kiehin FCR 39 Wont Idle

    To help others with the same issue. I was to the point that i was considering trading my non working FCR carb for a CV. I can't explain it, but in a last ditch effort I removed the coast enricher and hot start completely then vacuum capped all the open ports. It has idled perfectly for the past week. What a headache....
  14. TOOPH

    DRZ400K3 Kiehin FCR 39 Wont Idle

    Well, it idled before i left for my kids tball practice. When i got back it didn't. I brought my carb in to work and the jets/bowl are sitting in an ultrasonic parts washer. I don't know how to get inside the middle portion of the circuit because i've been told not to fully submerge the carb...
  15. TOOPH

    DRZ400K3 Kiehin FCR 39 Wont Idle

    Pulled the pilot to inspect it again and it looked good. So, I went through the pilot tunnel? With a wire and it idles now. Hopefully that's it, going to buy an inline gas filter tomorrow.
×