Jump to content

crf450rrider79

Members
  • Content Count

    23
  • Joined

  • Last visited

About crf450rrider79

  • Rank
    TT Newbie

Profile Information

  • Location
    Ontario

Recent Profile Visitors

175 profile views
  1. Cannot comment on warp9 as have not owned. Tusk comes time spoked to hub with bearings. That is it
  2. Other then slightly heavier and torque spikes regularly for first while they are great durable product at a decent price. I highly recommend a lot of tusk products if every ounce of weight isn’t your first concern when shopping
  3. crf450rrider79

    Need 02-07 cr125 subframe and airbox

    They took 9 bikes and two quads. And bunch of parts. The cr was elswhere but the subframe with airbox was with the bikes😔 Was one of the few from the collection I have left
  4. crf450rrider79

    Need 02-07 cr125 subframe and airbox

    Someone stole my subframe and airbox off my 05 125 😔 So if anyone has one forsale please let me no
  5. crf450rrider79

    Proper jetting technique

    My main stock is 168 and went down to 165 as was to rich. I went down on pilot to 40 and lowered needle one clip. Seems really good
  6. crf450rrider79

    Proper jetting technique

    Thank you. And cam is 05 hrc race cam. So high duration. Appreciate the advice
  7. crf450rrider79

    Proper jetting technique

    Ok so difference of opinions has me stumped. I have 05 450. High comp,05 hrc factory cam,ported head,fmf exhaust,o ring mod and updated accel pump. I get varying opinions on jetting. Some say do regular plug reading and some say that doesn't work properly. My worrys are some say to check air fuel ratios but the plug looks lean when properly jetted? Wich is correct? Also what are experiences with cams and porting? Backwards to my thinking after the mods it seems to be rich? Anyone have experience similar?
  8. crf450rrider79

    05 Crf450r fork rebound stack

    Thank you👍👍
  9. crf450rrider79

    05 Crf450r stock fork rebound stack

    Putting race tech gold valve in. And revalving. For my wheight when DVs codes entered it recommends stock rebound stack. That's great except my forks are valves for a pro behemoth. Does anyone no what the stock valving is in 05?
  10. crf450rrider79

    05 Crf450r fork rebound stack

    Putting race tech gold valve in. And revalving. For my wheight when DVs codes entered it recommends stock rebound stack. That's great except my forks are valves for a pro behemoth. Does anyone no what the stock valving is in 05?
  11. crf450rrider79

    05 Crf450r rt gold valve valvin

    Can save and print after
  12. So got both fork and shock kit. Entered in all info and only fork code worked. Wtf right lol. But then to boot the printouts got burnt for fork stack recommendations. Now what? Anyone have a good valving recommendation for starting point? 195 c amateur mx rider. Any help would greatly appreciated
  13. crf450rrider79

    05 crf racetech gold valve help

    Have a racetech kit gold valve kit for my Crf450r. Anybody have any experience with these kits? code for shock doesn't work on there site for calving calculator. Anyone have a baseline for shim stacks to start with for 195lb c rider likes on the soft side. Any help would be greatly appreciated
  14. crf450rrider79

    05 450 backfiring on start

    Will give another cleaning today but cleaned it when taken from storage for the 30 days and fresh fuel used
  15. crf450rrider79

    05 450 backfiring on start

    Double checked the slide assemblyalready. Shouldclean pilot circuit againto be sure but seemed to be spraying through quite well and plug well beleive the dealer has to order me one? Lol non instock. Thank u for replys. Will double check everything today again
×