Jump to content

henderson4890

Members
  • Content Count

    51
  • Joined

  • Last visited

About henderson4890

  • Rank
    TT Member

Profile Information

  • Location
    Alabama

Recent Profile Visitors

179 profile views
  1. Need help this wolverine floods. I've done everything possible to get it to stop. It has a low end studder. i bought a new carb and it ran fine. 3 months later it started to flood and I've done everything. I took the old jets out of the old carb. I've checked compression I've done everything. Anyone have any advice.
  2. henderson4890

    Got scammed on a trade - Need advice

    I know how it feels to be screwed over in a trade. Bought a 04 yz125 with only 4 hours on it got it home kicked it over rode it easy for 30 minutes and the crank went bad, Had to put 800 worth of motor work in it from a shop then got it home rode it 5 hours and the piston seized and ruined the cyclinder because the mechanic didn't fill up the coolant all the way and didn't put the air filter on just sat it in the air box
  3. henderson4890

    Yz125 won't hold together.

    Thanks for all the help guys. Any chance anyone got a spare 125 cylinder laying around xD
  4. henderson4890

    Yz125 won't hold together.

    I feel like a idiot right now xD
  5. henderson4890

    Yz125 won't hold together.

    Because i had no idea. You can certainly tell this is my first two stroke. xD
  6. henderson4890

    Yz125 won't hold together.

    So what do I need to do. To prevent this again when riding.
  7. henderson4890

    Yz125 won't hold together.

    I wasn't running wide open. Third or fourth gear tops. But I certainly never was aware of that. That could have also been a contributing factor to my detonation. Alright. Now explain how I can avoid this again. Like is there a certain procedure to down shift?
  8. henderson4890

    Yz125 won't hold together.

    Explains that last part again friend? And No the orings on top of the cylinder were fine. Not deformed or stretched.
  9. henderson4890

    Yz125 won't hold together.

    I pushed it harder the days before. I was easing down the road to a friends house on loose gravel. Wasn't gonna try to push it hard. I'm starting to think all the factors. Between the air filter. The lower octane gas than what is required in the bike and the low coolant.
  10. henderson4890

    Yz125 won't hold together.

    When the guy did the build on the bike he changed all the seals. Could it have gone bad within 6 or so hours of easy trail riding.
  11. henderson4890

    Yz125 won't hold together.

    Could the coolant have been low enough to make it over heat to such a extreme? I ride in a very warm dry desert like area. Or could it have been the 91 octane no ethanol fuel. With it being a built bike it probably has higher compression than a stock 125.
  12. henderson4890

    Yz125 won't hold together.

    And I've looked at the bottom end. It turns over fine if that's what you call it. And theyres no play in the crank. Also the coolant was a little low. It was full when I got it. They're wasn't any in the bottom end oil and it wasn't leaking. Is that normal? And I didn't think it was low enough to hurt anything because a decent amount came out when I dumped It.
  13. henderson4890

    Yz125 won't hold together.

    Well. I do need a cylinder for sure. It's toast. But so the air filter not being on it wouldn't be the cause of leaning it out?. Explain the hole in the piston. Btw. This is my first two stroke. Obviously. This is all new to me.
  14. henderson4890

    Yz125 won't hold together.

    And also looking at the picture of the piston. It's the crank supposed to have that discoloration or bluing to it?
×