• Content count

  • Joined

  • Last visited

Community Reputation

9 Neutral

About Colby525

  • Rank
    TT Member

Profile Information

  • Location

Recent Profile Visitors

184 profile views
  1. Ok, will do. Axle is slightly sticking out of the clamps. Do I a new axle or just larger spacers?
  2. Picked up the 04 over the weekend. I have a few questions. What is the length difference 06+ front axle compared to 04 models. Want to be sure the correct front axle was Installed for the sss conversion. Also, the cylinder head is in pretty bad shape. The bike ran fine over the weekend, but I wanted to pull the jug off to inspect the condition of the piston and cylinder. The cylinder and piston are in good shape, but the head is scarred pretty bad. What are y'alls thoughts on this and do you think I should have the head resurfaced or replaced. Let me know what you guys think. Thanks in advance
  3. So if he is running a 2007 triple clamps, I would need to ensure that the 2007 axle is being used as well?
  4. He said he used a later model upper and lower triples. Do you think I will run into problems in the future?
  5. Thanks for the reply. does anything have to be done with the shock for the conversion.
  6. Howdy, I currently own a 2016 yz250f, but looking to make a switch back to the two strokes. I am looking into buying a 2004 yz 250. I so like the steel framed bikes, but the suspension is sub-par compared the newer kyb sss. I found a guy who made the conversion to the new kyb sss forks and shock, but after talking on the phone with the guy I have a few questions. I know that you will need updated triple clamps. I have also read that to make the conversion you have to make modifications to the steering stem to get it to fit the steel frame. Is this true? He was saying that all you have to do is replaces the triple clamps and its a bolt on upgrade. I just want to make sure the conversion was done correctly before I purchase the bike. Please let me know what you guys think. I have attached the link below. Thanks in advance.
  7. Not sure what you mean by book the fluid? Can you explain
  8. Lost all pressure in my rear brake caliper at the track. Tried bleeding and reverse bleeding them with no luck. Piston is not stuck and I can't find any leaks. I have a race tomorrow so I need to find a solution. Any advise would be appreciated.
  9. I would also like some feedback on the Yamaha Bolt. I've been riding motocross most of my life. I am looking into getting a cruiser.
  10. Anyone know of any free riding spots in the metro area. I live in gwinnett county. Would like to to find a good spot to ride.
  11. thank you,sir
  12. quick question, does 2014 yz250f come stock with a sunstar 50 tooth rear sprocket?
  13. Rode it down the street this morning. It's definitely not hiting into gear between 3rd and 4th. Probably going to strip her back down in a few to be sure I assembled everything properly (had some problems with the springs and shift paws) Any suggestions would be appreciated.
  14. Replaced my shift stop lever tonight. Flushed out the gearbox with a little premix. Put everything back together now the bike seems to be hitting false nuetrals when I run it through the gears on the stand. Seems to up shift fine, then hit glade nuetrals when down shifting. Any suggestions?