Jump to content

Brandano

Members
  • Content count

    8
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Brandano

  • Rank
    TT Newbie

Profile Information

  • Location
    British Columbia
  1. Brandano

    Piston

    Thanks guys for advice and knowledge. Appreciated! It's out.
  2. Brandano

    Piston

    I hear you. How would I get rod out? New at this...
  3. Brandano

    Piston

    No rust at all.
  4. Brandano

    Piston

    Ideas of how to get stuck piston out of cylinder? Engine is out of bike. 2000 yz250 2 stroke. Have put oil on top of piston it does leak down and out. Lightly tappend on top of piston with wood and hammer while pulling up on head. Got bolts off, rod looks good and moves well from lifting and putting down block. Can't get piston to budge. Shavings and nice metal on top of piston. Seems tight at one side and not as much on other. Scrapes on cylinder wall. It's about halfway in cylinder. Thanks
  5. Brandano

    2000 yz 250 2 stroke

    OK thank you guys so much. Probably a silly question, but will I have to drain gear oil? It looks like there is cover just over flywheel... And any information on checking cdi box please?
  6. Brandano

    2000 yz 250 2 stroke

    New at this. Could that be cause possibly? I will try that Thanks
  7. Brandano

    2000 yz 250 2 stroke

    Wondering if you may have any thoughts.... River crossing and dumped bike completely under while running. Got out stood up and drained from tail pipe. Took spark plug out and turned upside down And hand cranked water out. Got it going and ran it for couple hours. Next day took it out for couple hours. Both times ran fine. Then took it out and about half hour stalled and couldn't start. I have drained old gas, put new in. Cleaned air filter and air box. Complete disassemble and clean of carb. New spark plug - white spark against metal. Drained old gear oil and put new. Electrical cleaner sprayed on all plug-ins. Can't get it going. Back fires a little sputtering about every 10 kicks
  8. Brandano

    2000 yz 250 2 stroke

    Wondering if you may have any thoughts.... River crossing and dumped bike completely under while running. Got out stood up and drained from tail pipe. Took spark plug out and turned upside down And hand cranked water out. Got it going and ran it for couple hours. Next day took it out for couple hours. Both times ran fine. Then took it out and about half hour stalled and couldn't start. I have drained old gas, put new in. Cleaned air filter and air box. Complete disassemble and clean of carb. New spark plug - white spark against metal. Drained old gear oil and put new. Electrical cleaner sprayed on all plug-ins. Can't get it going. Back fires a little sputtering about every 10 kicks
×