Jump to content

Brian Backus

Members
  • Content Count

    2
  • Joined

  • Last visited

About Brian Backus

  • Rank
    TT Newbie
  1. Brian Backus

    Ultrasonic cleaner for carb

    I have a Lyman Ultrasonic cleaner. So use just straight Pine Sol eh? need to buy new rebuild kit.
  2. So, I bought this bike a month ago. It ran in the guys garage but I never rode it, just paid the man and loaded it up and brougth it home. So it runs, but is very hard to start...won't idle, backfires, spits, I have to keep working the throttle to keep it running. The first time I started it the throttle cable/throttle tube, etc...wouldn't even return so I parked it for some clean and lube...I wasn't wearing a helmet...it was 11:00 at night, snowing, I'd never ridded a BRP before...didn't want to have to pry myself off a parked car down the street so anyway here I am today. I've had time now to clean and oil the air filter, new spark plug, drained the tank, and carburator bowl, fresh fuel, new throttle tube, lubed cables, new grips, (new AVS levers), and so I'm back to where I started...Yesterday, with a ton of effort, I finally fired it back up. I almost quit trying to kick it; but I'd then try one more time. I finally tried a shot of starting fluid, but only caused a fire in the airbox but it quickly was put out...I had the Uni Filter (freshly cleaned) out with the choke on half; and it finally came to life. I had to keep working the throtte...I quickly flipped the choke wide open and it ran better and I thought it was going to run fine...I put it in gear and ran it down the street...hoping it would just run fine...One Block, Two Blocks, Three Blocks...turn around...same thing on return...I wheelied a bit in second gear...I know I was smiling...anticipating a nicley running bike that I now could continue to dump tons of money into. But then I got back to the house and I was still pumping the throttle, and then I thought well lets see how she idles...and flatline...................... I'm thinking rebuild the carb...AGAIN...the one reciept the guy gave me was fron his local power sport store for a carb rebuild and tune for $408...labor/parts etc...I am assuming it ran good then...??? What'd ya'll do?
×