jon gault

Members
  • Content count

    14
  • Joined

  • Last visited

Community Reputation

5 Neutral

About jon gault

  • Rank
    TT Newbie

Profile Information

  • Location
    Utah
  1. I took an old shock washer welded two small washers on it to fit the bolt pattern and presto! it's runs as quiet as a church mouse.
  2. What is the diameter of the outlet of the Stealth piece? Part # 18312-KT1-670. I've built a part that bolts on but need to cut the hole to that diameter.
  3. I understand that the mufflers are made to fit each individual frame but how about the silencer, The part that slips into it, https://www.ebay.com/p/Honda-18311KT0670/1811827631?iid=302664834404
  4. Are all silencers the same size O. D. ?
  5. That's what i'm looking for. Either the silencer or the muffler/silencer together. They can't all have been thrown away.
  6. It looks like the one in your picture with out the modification. I can weld it in to fit my pipe but I need a quiet one.
  7. I'm looking for an XR200 stock muffler with the silencer insert. I have a 1983 but many years will fit and if necessary I can weld it to my existing pipe. What do you have. Please PM me. thanks.
  8. I found several baffles on Ebay . My question, some appear to install on the inlet side but mine is welded together. What kind do I want? Also how do they stay in on the outlet side? thanks. Here's a link to ebay baffles. https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR0.TRC0.H0.Xxr200+exhaust+baffle.TRS0&_nkw=xr200+exhaust+baffle&_sacat=0
  9. I have an 83 XR200r and it is very loud. My son has an XL250 that is very quiet. Is there a way to quiet down my bike hopefully without breaking the bank. Both have stock exhaust currently.
  10. Thanks. This is what I'm needing. The ones on Ebay are not like this even though they say they fit. Anyone have one sitting around?
  11. I'm putting a 1983 XR200 back together that I just bought. It is missing the skid plate. There is a small piece that was bolted to the frame that was left. All of the skid plates I see on Ebay don't look like they would bolt properly to this mounting location. Can someone take a picture of theirs to see what it looks like? I don't want to buy something that doesn't fit. Thanks.
  12. I found the problem, Pretty simple.
  13. Update. It will smoke badly one time and the next will have no smoke. Will tilting it onto it kickstand do anything?
  14. Hi, New here, I just bought a 1983 XR200. When I bought the bike it ran fine with no smoke out of the exhaust. I changed the right side clutch cover and changed the oil using 15-40 rotella T Now when it runs it pours blue smoke. Again I had no problems before I did these two things. I noticed what could be an oil passage that is contained by the clutch cover gasket. I have many years of automotive background but never encountered this. Any thoughts?