Jump to content

Sweet tooth sensation

Members
  • Content Count

    88
  • Joined

  • Last visited

About Sweet tooth sensation

  • Rank
    TT Member

Profile Information

  • Location
    Texas

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Sweet tooth sensation

    Am I missing anything?

    CORE has colorful hoses that they can make up in any color combo you want. They are on Ebay also.
  2. Sweet tooth sensation

    Am I missing anything?

    Get a skid plate to protect your powerplant.
  3. Sweet tooth sensation

    Ducati Monster 1100 EVO 2012

    Tail fairing signed by Nicky Haden at a press release in Anaheim, Cali. Custom paint was made for him at this event.
  4. Sweet tooth sensation

    Ducati Monster 1100 EVO (2012)

    0 comments

    Tail fairing signed by Nicky Haden at a press release in Anaheim, Cali. Custom paint was made for him at this event.
  5. Sweet tooth sensation

    Cracked main case on a 2017 WR

    Sounds good
  6. Sweet tooth sensation

    Leaf blower to dry your motorcycle?

    Thanks for the blower idea ! Radiators hold alot of water, I just washed it from MX practice on Thursday night at Village Creek MX in Fort Worth TX. Clean-N-Dry! The Klotz in the birdlife mix makes it smell nice too. LOL.
  7. Sweet tooth sensation

    Leaf blower to dry your motorcycle?

    Some days in Texas it's like a blast furnace, power wash and the hot breeze will dry it quicker than you could towel it off. Ride it down the street to get the water out of the chain then lube it with lucas oil chain lube , from O'riellys auto parts.
  8. Sweet tooth sensation

    2014 wr450 not starting?

    Can you take it apart and clean and inspect it ?
  9. Sweet tooth sensation

    2014 wr450 not starting?

    My 2010 CRF450R FI starts so easy with flip flops on, if the valves are in tolerances.
  10. Sweet tooth sensation

    Cracked main case on a 2017 WR

    I have a Miller econotig welder at my shop in Mansfield, Texas. Bring it over and we can fuse the crack together. I've done lawn mower cases that blew up in pieces and put them back together. Hardest part is getting the crack clean. Try starting fluid for the final prep.
  11. Sweet tooth sensation

    2014 wr450 not starting?

    Hard starting is typical of intake valves that need smaller shims. Get the valve cover off and check the clearance.
  12. Sweet tooth sensation

    CRF450R Jetting problems (Hawaiian Islands)

    I got stranded out in the inland waterways in Port O'Connor ,Tx. Due to a non venting gas cap on a new jet ski. Also glad to see you checked the float height from my post on page one. Riding in sand = full throttle most of the time, tank needs optimum venting and correct float bowl height. When I put an FCR 41MX on my DRZ434 it would suck the bowl dry at full throttle in a 1/2 mile. Changed the height and it runs flawless.
  13. Sweet tooth sensation

    CRF450R Jetting problems (Hawaiian Islands)

    Float bowl height could be too low, thus sucking air when the gas gets too the bottom of the bowl. Are you running at full throttle for a1/2 mile? Can you tell us more symptoms? Your paragraph was cut short.
  14. Sweet tooth sensation

    Steering stem bearing, replace or re-pack?

    How does the top of the shaft look? If the head bearing was loose and banging the shaft , the top bearing race can wear away some of the shaft and new bearings will still flop around. I found this on a bike I bought this year. I had to get the whole thing. It doesn't look like much is missing, but new OEM bearing race has a lot of play. The top is easy to change but the bottom bearing has to be cut off and new one pressed on with a hydraulic press.
×