Dakota Pacurian

Members
  • Content count

    2
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Dakota Pacurian

  • Rank
    TT Newbie
  1. Alright I'll tear back into it I know the slide is returning all the way down can feel it hit the idle screw, and the throttle is slide move smooth the bike appears to be in good shape, it was last stickered 97 don't think it's been run much sense then, it has had the water pump done and the recall for the magnesium cover replaced and all the gaskets look decent besides a little cracking on the carb boot that I threw some sealer on. I'll see what I find I've worked on tons of two strokes and this one just has me stumped at this point i have to be overlooking something somewhere
  2. Just picked up a 87 husky 500 and cannot get it to idle down, I have went through and unplugged the Jets and cleaned the carb it fires right up, but goes into a high idle about 3/4 wide open it seems the Jets are the right size for my elevation, anybody have any suggestions before it goes to the shop, should I go through the carb agian or am I just missing something