Jump to content

Dead Fragz

Members
  • Content Count

    17
  • Joined

  • Last visited

About Dead Fragz

  • Rank
    TT Newbie
  1. Dead Fragz

    2009 Kx250f having idle problems

    it did run and it was a shim job, but to keep it running it you had to rev it up and it always had a high idle. im going to get a new float needle either today or in a couple days. it has a hard time starting atm but its probably because of the cold and the fuel because of the float ill keep you updated. Thanks For the help!
  2. Dead Fragz

    2009 Kx250f having idle problems

    i added on thanks for you help! im thinking timing is off as well not 100% sure "new to dirt bikes"
  3. Dead Fragz

    2009 Kx250f having idle problems

    if i do the float needle wont let fuel through. ive tried setting it i found the spot where it doesnt over flow the carb but does fill it up maybe need a new float needle? and to add to the note when kicked over it like feels like the chain gets stuck or something like almost like a messed up crank on a bike where when you peedle it feels like it misses a tooth or something
  4. Dead Fragz

    2009 Kx250f having idle problems

    bike had a valve job just done and the carb jets were just cleaned. on e thing i have noticed is that when the float is level and i put the bowl back on it doesn't let fuel in so i have it adjusted weird. but it only idles with the choke on i got new stock jets and those didn't work i have bigger jets that it had originally on and it still doesn't idle then when it shuts off it has a hard time starting.
  5. Dead Fragz

    Kx250f Backfiring problem need help!

    i found a problem and wondering if you would know how to fix it. i took the carb off and clean it but i found something werid i blow through the gas nipple and the float and needle allows air to come through but the moment i put the bowl back on it doesnt allow air/gas through? just found the problem last night don't know how i didnt notice this before but the carb float bowl has a dent which pushes the float up
  6. Dead Fragz

    Kx250f Backfiring problem need help!

    new jet and sprayed down with carb cleaner but one issue i have found and cant seem to clean out is where the float needle sits its clogged and i can seem to clean it out good any vids or tips?
  7. Dead Fragz

    Kx250f Backfiring problem need help!

    ok ill give it a try and some more info the bike wont idle unless it has the choke on ill make sure the exhaust is nice and tight and sometimes when kicking over the bike it does baackfire from the carb as well
  8. Dead Fragz

    Kx250f Backfiring problem need help!

    Having a weird problem with m,y bike youll see the difference in the video from with the choke on vs when the choke is off. Don't even know where to start..
  9. Dead Fragz

    HELP! Kx250f Valve problems

    i did what you said made sure everything was tight and in place and its spinning like a charm thank you!!!
  10. Dead Fragz

    HELP! Kx250f Valve problems

    ill try again but i dont have anything to measure the torque
  11. Dead Fragz

    HELP! Kx250f Valve problems

    Hi i own a 2009 kx250f first four stroke so im running into problems atm, i adjust the valves and they are all fine as far as it seems. when i put the chain on everything was tdc as far as i know i put everything back on the and kick it to test before i put the plastics and all that back on and it wont kick down anymore i think its the chains problem but i dont know HELP!
  12. Dead Fragz

    91 Cr125r Revving really high

    the cable was too short i got one that was 47" only needed one more inch original was 46"
  13. Dead Fragz

    91 Cr125r Revving really high

    i fixed the issue i got a cable from a kit that i needed anyways for the throttle assembly. now the only problem im having is too much fuel idk much about jetting maybe a useful guide im in las vegas at 2k elevation
  14. Dead Fragz

    91 Cr125r Revving really high

    its not closing and i ordered it off wincycles so i dont know ill give you the link http://wincycles.com/p756/Honda-CR125R-Carburetor-1990-1991/product_info.html the throttle cable seems to be too short do you know where i could get one thats a little longer?
  15. Dead Fragz

    91 Cr125r Revving really high

    Heres the idle adjuster? Also when revving it the idles still stays high and doesnt bog
×