Jump to content

nathan smith

Members
  • Content Count

    22
  • Joined

  • Last visited

About nathan smith

  • Rank
    TT Newbie

Profile Information

  • Location
    Florida

Recent Profile Visitors

41 profile views
  1. nathan smith

    cheap performance mods xr200r

    do the crf230f motors bolt in or is their modification required
  2. nathan smith

    cheap performance mods xr200r

    yeah i was thinking about going down to a 12t because it increases bottom end torque. correct?
  3. nathan smith

    XR200R Modification Guide

    https://www.motosport.com/blog/a-simple-guide-to-jetting-your-carb the link above is a good website to use if you want to learn about jetting your carb
  4. nathan smith

    making the rear suspension stiffer xr200r

    ok thank you for letting me know about the searching
  5. nathan smith

    cheap performance mods xr200r

    alright thank you i did the top end about 25 hours ago time wise on the bike thinking about getting a power core 4 should i do jetting first and if so what jet should i get
  6. does anyone know what shock will fit in my 2002 xr200r?
  7. nathan smith

    cheap performance mods xr200r

    ok cause i ride in a place where there is clay sand mud and big water holes and me and my friend are always riding the bikes hard probabaly harder than we should
  8. nathan smith

    cheap performance mods xr200r

    ok i saw a sprocket on rocky mountain for $8 would that be any good
  9. nathan smith

    cheap performance mods xr200r

    its not the being cheap part I just cat go out and drop 300 on an exhaust im trying to increase power without spending alot
  10. nathan smith

    cheap performance mods xr200r

    i already did black but i want more torque down low
  11. nathan smith

    cheap performance mods xr200r

    does anyone know any cheap performance mods that i could do to my 2002 xr200r?
  12. nathan smith

    xr200r exhaust

    oh. i see looks like you did alot of prying to get that off lol. on the end of my exhaust there are two spots where it looks like bolts should be there are no bolts. now that im looking at pictures online i guess the guy that had it before me took it out because my exauhst just curves in and goes all the way back to the inside of the exhaust
  13. nathan smith

    xr200r exhaust

    ok i was always wondering what those two bolts on the bottom were
  14. nathan smith

    xr200r exhaust

    ok how would i get the exhaust apart on it to get the baffle out
  15. nathan smith

    honda xr200r blackout

    sure can do the way i have painted my front fender is i sand it paint it with engine paint and then wipe it with laquer thinner and it makes it all the same shaped and makes the plastic matte
×