Jump to content

inuk-mxxer

Members
  • Content count

    18
  • Joined

  • Last visited

Community Reputation

10 Neutral

About inuk-mxxer

  • Rank
    TT Newbie

Profile Information

  • Location
    Nunavut
  1. inuk-mxxer

    big bearing?

    bump ttt
  2. inuk-mxxer

    big bearing?

    big bearing? a buddy of mine had his crank for his 00 rm 250 sent down to be redone a few weeks back and when it came back it had a different connecting rod on there... problem is the wrist pin diameter would have to be different (his was small and it came back big) so he'd have to have a bigger bearing that can still fit the smaller pin for the stock piston (he has a bunch of those) or find a piston with a different pin (my pro x 440 piston fits on there only shorter stroke) so will i be able to find a piston that fits? or a bearing?
  3. inuk-mxxer

    big bearing?

    a buddy of mine had the crank for his 00 rm 250 sent down to be redone a few weeks back and when it came back it had a different connecting rod on there... problem is the wrist pin diameter would have to be different (his was small and it came back big) so he'd have to have a bigger bearing that can still fit the smaller pin for the stock piston (he has a bunch of those) or find a piston with a different pin (my pro x 440 piston fits on there only shorter stroke) so will i be able to find a piston that fits? or a bearing?
  4. inuk-mxxer

    kenda sticky?

    so its like the dunlop r tire?
  5. inuk-mxxer

    kenda sticky?

    whats the difference between the kenda sticky compound and their standard compound?
  6. inuk-mxxer

    hand drag

    of wil hahn... dragging his hand in the dirt
  7. inuk-mxxer

    hand drag

    there was a pic posted before of wil hahn dragging his hand in the dirt while layed right over.... anybody have that pic? also some bar drag photos would be nice happy boys? i rushed, my bad
  8. inuk-mxxer

    tire balls?

    well it does get annoying changing tubes every now and then... i ordered a set so i'll find out soon enough as to how they perform
  9. inuk-mxxer

    tire balls?

    thats normally what i run but have surpisingly had better results with the "standard" tube.... what i want is an honest opinion as to how they feel and what it'd be like to have a flat?
  10. inuk-mxxer

    tire balls?

    yes i have tried different tire pressure but that affects the feel of the bike in a way that i dont really like... http://www.tireballs.com/
  11. inuk-mxxer

    tire balls?

    just wondering what you guys think of tireballs... if i pinch another tube than i'll be switching over to tire balls... ive tried the foam inserts but ive never likes the feel of them compared to tubes
  12. inuk-mxxer

    ?woods Weapon?

    the motors from 03- 06 are basically the same, not so sure about the 07 tho... i think they made a small port change in 04 but nothing you would notice... i'd say get a new 05 than revalve the suspension and have it ported to run better at lower RPMs and put in a 10 ounce flyweight and than a bunch of off road protecion goodies than you'd have a woods weapon...
  13. inuk-mxxer

    03 cr 250 powervalve/race motor ?

    so they say they sent it not knowing the valve cables were cut... they'll be sending a new set of cables and they said that should make it run as it was supposed to... the thing is it is already alot quicker than a stocker so once get them on there i should be having LOTS of fun trying to get used to the additional hp (they said more top end, but alot more gains in tourqe).... i guess i'll be the holeshot king now eh?
  14. inuk-mxxer

    Scrubing... Not how to...but how does?

    actually the scrub has nothing to do with suspension... its alot like a down hill skier does, instead of going straight down the hill he goes from side to side which makes the hill not as steep... bubba attacks the jump at an angle which makes the jump face shallower? which is where the extra speed comes in handy and the little spectacular whip which he shows is what keeps him from landing on the side of the track
  15. inuk-mxxer

    03 cr 250 powervalve/race motor ?

    no word yet, the guy that i called from blackfoot really had no idea what he was talking about, he was gonna ask the team mechanics so i'll be giving him another call tonite
×