blooozboy

Members
  • Content count

    37
  • Joined

  • Last visited

Community Reputation

10 Good

About blooozboy

  • Rank
    TT Member

Profile Information

  • Location
    United Kingdom
  1. I am using a CRD absolute performance,really quiet but the power does not seem to be there I would swap for a louder pipe if it meant more power
  2. for some reason the seat covers seem a bit tight but the graphics fit fine
  3. nice one man
  4. I am starting to feel young again
  5. I want one!!
  6. cheers boys I feel yonger allready
  7. Any Oldies out there, people keep telling me that at 41 I should hang up my boots What do you all think
  8. Sorry its an R100
  9. Hi There were no mods to be done with the exeption of a 1/2 inch spacer between silencer and frame The one I am running is a single mounting point ali not titanium hope this helps
  10. Hi I am a UK thumper owner and running a CRD off a 450 currently on a 426 personally I think this pipe is restricting alot of power but it is real quiet most 450 pipes will fit the 426,Anyone have any oppinions on wheather these pipes do restrict power THANKS
  11. anyone know where i can get a mag drain plug for a wr 426 2002 in the uk
  12. KTM do a kit but is is expensive,There was a rad converted on EBAY UK dont know if it is still there
  13. OK here we go It is a reasonadly easy job with the right tools.In the adsense of these you need to do the following: After stripping legs and removing old seals which is just nuts and bolts you need to put new seals on legs this is where the problem is they tend to want to turn the lip inside out as they go over the recess in the stantion for the collar If you wrap a layer of insulating tape around this collar to eliminate the step it is easier then give the leg and seal a good oiling with fork oil and it should slip over. When you replace stantion in the upper leg slide seal up to the recess and tap in carefully with a BLUNT punch working all the way round gradually again using lavish amounts of fork oil. The ideal way is the proper tools but they are not cheap or easy to get.Hope this helps
  14. Go to link click TECH ARTICLES then scroll down to MISC and then WORKSHOP MANUAL just tried ad it worked,Where are you in UK I am in S Wales and have a manual if you have a particular prob Take Care Craig
  15. Bugger it I left them on,Thanks guys for all your help