• Announcements

    • Bryan Bosch

      2019 Zooks!   07/17/2018

      Suzuki Introduces 2019 Motocross, Dual Sport, Off-Road and Youth Models

hardcore_rm

Members
  • Content count

    16
  • Joined

  • Last visited

Everything posted by hardcore_rm

  1. Hi Guys, I have a 98 Cr125 and i am trying to find a rear wheel to fit. After searching I have found conflicting posts about what years are interchangeable. Can someone tell me what years would fit? Also once I find a rim how do i tell the year it is from? is there a stamping? Any help will be appreciated. Thanks.
  2. The wheel I currently have has the followint markings ML3RR 234 72 - 08 -15 19x185 According to http://**************/HONDACR125BIKEID.aspx ML3-RR 234 - 20MM AXLE DIA - BRG TO BRG 134MM - BRAKE ROTOR DIA 220MM - ROTOR BOLT CIRCLE DIA 140MM 4 BOLTS - SPROCKET BOLT CIRCLE DIA 153MM 6 BOLTS - FITS 95-99 CR125, 95-99 CR250, 95-01 CR500 It should fit my bike but the axle is too big to fit through the swingarm. It is more like a 25 mm not a 20mm like it should be any ideas?
  3. I'm not sure what I am doing wrong but I cannot see the "where used ?" Button? I can get an 02 rear rim + axle etc. Will this be a straight fit ? or is it a different size? I have read they went to a 24mm rear axle in 03 so does this mean it will fit mine? Thanks.
  4. i have an 04 rmz with a white bros alumium pro, ever since i have had it i get black tyre marks on the inside where the tyre rubs once i land from a jump. does anyone else have this same problem?
  5. only have a 100 on it which is why i was wondering if it is normal, is it easy to notice if subframe is tweaked cos it all looks fine to me
  6. helicoil kits pretty easy, just get the right size
  7. when i found top dead centre to check the valve clearances but when i lined the markings on the cams with the top like the manual says. the little mark u have to look at when u turn the crank is not quite in the middle. should i go by the cam marks or by this mark?
  8. i was tightening my cam cover bolt to 84lb and was going slow taking them up in order slowly to 50 then 60 -70-80 but as i got one to 60 it snapped off in the head. anyone else had this problem? i took them out and u can see where they have been stressed and the others look like they are about to snap also. i am going to go buy new ones if they aren't too expensive. anyone else ever had this problem or know how to extract the snapped off bolt? are easy outs the best way?
  9. ive got same problem looking for an answer also?
  10. bought a white brothers aluminum pro off ebay, only the silencer not the full system having problems getting it to line up with my stock header. anyone else had this problem?
  11. im from australia so i'll need it posted over here, postage costs might be a pain, i'll look around see if there is any way to modify stock header and get back to you
  12. i only need the header though, will u sell it seperate?
  13. got aluminuim race pro and now need a header for it, anyone got one that will fit?
  14. Do u need the headers to fit them on ur bike or can u use the stock head pipe? cos i jut bought the silencer only off ebay the other day
  15. measured my vavle clearances today inlet was.6mm and exhaust was .8mm anyone tell me what size shims i will need? cheers
  16. i have had my bike for about 3 tanks of fuel now bought it secondhand 04 model 250, bike used to start easy within a few kicks but lately have to clutch start it cos it wont kick over, once its warm it will kick though? just not when cold does this mean i should check my vavles?