• Announcements

    • Bryan Bosch

      JUST IN!   04/24/2018

      HOW TO: 4-STROKE PISTON REPLACEMENT DONE RIGHT!

MXfireman11

Members
  • Content count

    10
  • Joined

  • Last visited

Community Reputation

10 Good

About MXfireman11

  • Rank
    TT Newbie

Profile Information

  • Location
    Connecticut
  1. Thank you guys for the quick replies......i will try your suggestion Racer...I a using fresh gas so hopefully it will just the screw adjustment....I will post how i make out.....thanks again.
  2. Also does anyone know the stock fuel/air needle settings for the 2004 XR100?
  3. Could it be the fuel/air mix needle seeing it was taken out at the time of cleaning? I set it 1.75 turns out from bottom out. That is what I believe is the stock setting?
  4. adjusted idle screw... but baseline idle seems too high
  5. I have a 2004 xr 100. It sat for quite awhile. I took the carb out and cleaned it VERY well and new spark plug. It now starts first kick and idle just fine. When riding it around once you let off the throttle it stalls out. If you feather the throttle a bit for a minute then easy out of it it will go back to idling fine. Any ideas on things to check or change. The bike is completely stock. And like I said it runs perfect other than stalling out when you let out of it.
  6. thak you soo much u were a great help i want to get everything to make this thing fly.
  7. What type of air filter like is there a certain kind i should get?????
  8. What can i do to make my 2004 Crf150 go faster. I have already put a smaller sproket on. If anyone has any ideas please let me know.
  9. What can i do to make my 2004 Crf150 go faster. I have already put a smaller sproket on. If anyone has any ideas please let me know.