• Announcements

    • Bryan Bosch

      JUST IN!   07/18/2018

      Video: 2019 Yamaha YZ250F Features & Benefits 

LooseDirt

Members
  • Content count

    282
  • Joined

  • Last visited

Community Reputation

12 Good

About LooseDirt

  • Rank
    TT Bronze Member

Profile Information

  • Location
    Florida
  • Interests
    aircraft, kitcars, RC
  1. Thanks for your help Its been ordered. That's what I love about TT.
  2. While where at it can anyone tell me what you call that lower brown looking rubber at the lower part of the spring mine has dryed out and falling apart in chunks. I hope they sell it separately.
  3. Thanks Noble, i for one am glad you are still around, it's been a while I haven't been on and still remember the good old days with Ed, Dr zoom, the TT bike build and such. So it's good to see your still cranking away! I will give sudco a call and see if they carry the T and if not I will just one hose that side. Thanks again.
  4. Well, after rebuilding my keihin flat cr off my 2006E I was in the process of reinstalling and ended up braking a plastic T, one of two, which plugs into a passage way that goes from one side of the carb to the other and to the vent lines. I been doing searches and reading and found a few posts on it but mostly glueing and or plugging. But none of them offered the answers I was looking for, so here it goes. All 4 vent lines go to the T's then down and out, so is the vent holes inside the passage way? If there are vents inside the passage way, I would like to replace it with a new one, not Mickey mouse it. So who carries this plastic T? What's the Part number? Part name? Endless search with no results. If there is no vent holes inside the passage way they connect to nothing and what's the point of having them? The vent line on top of the accelerator pump and the overflow at the bottom of the bowl those two lines I understand, it's just the other 4 that are not clear. Thanks in advance for any help or pictures that would help.
  5. Wow things have changed. Been many years since I have been around here and needless to say my E has been sitting just as long. Great to see there is people still at it. My E project is back up and I promise to post some pics soon. I was cleaning replacing and going thru everthing carbs and such. I found my front master cylinder empty which is where I left off when I was installing a front ss brake line, but the inside of the master cylinder is caked with white oxidation and it has rust at the bottom, so I need to change it. I can find one on fleebay, but is there any other options out there for me? I do have a wheeling cycles sender unit on this one now for my brakes, so I need that aspect included in my choice and i perfer quality. Thanks for any help in advance. I was looking for the TT475 bike build list but only found fragments.
  6. Wow things have changed. Been many years since I have been around here and needless to say my E has been sitting just as long. Great to see there is people still at it. My E project is back up and I promise to post some pics soon. I was cleaning replacing and going thru everthing carbs and such. I found my front master cylinder empty which is where I left off when I was installing a front ss brake line, but the inside of the master cylinder is caked with white oxidation and it has rust at the bottom, so I need to change it. I can find one on fleebay, but is there any other options out there for me? I do have a wheeling cycles sender unit on this one now for my brakes, so I need that aspect included in my choice and i perfer quality. Thanks for any help in advance. I was looking for the TT475 bike build list but only found fragments.
  7. I have not been around for a while but getting back at it. I am installing a Trailtech Vapor with an Indicator Light Dashboard on my E which already has a street package on it, lights,horn etc. Since the E does not come with all the ribbons and bows as in sender units on temps and neutral indicators, fuel levels, fluid levels etc. Which indicators lights combination did you use on your dashboard that came with the unit? If you came up with something new for the indicator light usage, please share it. So far i have 1 left and 1 right turn signal and 1 high beam, so i have one slot left. Another issue i was wondering was what set up did you use for the front speed sensor? rotor bolt? did you drill the sensor mount onto the brake caliper? Well its good to be back guys and thanks for any input.
  8. I with PeteNfla on this one. Get yourself a manual and read this http://www.thumpertalk.com/forum/showthread.php?t=639008 and be sure you can do it before you start.
  9. You see when they are born they start off white, then after a few yrs they turn yellow color (all that smoking), then after a few more yrs they turn that bluish color (lack of blood flow). Then near the end they start to loose power and die, thats when you start to see the black color come out. Now we all know the guys in black spend more money trying to keep the beast alive, heck some of these good hearted guys buy it from the factory that way, just not to see the beast die alone, these are the true believers. Some have even been known to talk to some voodoo Godly guy called ED to help but i would call it folk lore.
  10. WELCOME to the family! I would tell you to run but its To late now lol.
  11. Thanks for the smile my muscles on my face have gotten a work out lol. It goes to show we have a bunch of inventive guys and gals here, great idea! keep us posted. I love the section padding look.
  12. OUTSANE if you look in at the top of page the faq section you can see a how to, but before you do make sure your engine is at tdc before removing. Read up as much as you can before you start that way its nice and easy.
  13. Its really easy, first get some c4 then wir......... forget it! thats the Marine in me coming out again. Talk to the condo asso or the guys that maintain the property see if they have a storage room with a key that you can use to store the bike.
  14. To answer your question concerning the brake light switchs, give forrest a call he will set you up with what you need it takes about 30min to switch them out. I wanted to ask what plate did you pop rivit from the s, my E has the numbers right on the neck.
  15. is there no other scottish people on here or something?? Someone told me that they ticket you guys for wearing kilts while driving your Drz, Is that true?