Jump to content
Antigravity Batteries Product Giveaways - LAST NIGHT TO ENTER! Read more... ×

Osirris

Members
  • Content Count

    28
  • Joined

  • Last visited

About Osirris

  • Rank
    TT Member

Profile Information

  • Gender
    Male
  • Location
    California
  1. Osirris

    2017 YZ250FX power tuner maps

    I'm in need of some good maps for my 2017 FX. Not much information out there, so hoping some of you riders would share.
  2. Osirris

    YZ250FX ride report and setup.

    The manual sates; Rear Rebound damping Minimum 30 clicks out Standard 11 clicks out Maximum Fully turned in Front Minimum 20 clicks out Standard 11 clicks out Maximum Fully turned in
  3. Osirris

    2015 YZ250FX feels jerky...

    I'm glad you got a chance to test this map out and giving us some feedback. It saves me a step since I really want that "popping the front end" effect.
  4. Osirris

    2015 YZ250FX feels jerky...

    Smokey510, I have attached the link that explains it better. Check it out, the modification allows more air to enter the engine. http://www.thumpertalk.com/topic/1116479-2015-yz250fx-owners-first-ride-vids/?p=12359461
  5. Osirris

    2015 YZ250FX feels jerky...

    This is good info, it makes it easier to understand. Thanks for the breakdown. I really like the the power band of the bike but would like to have more power on bottom, mine feels a bit soft. I want to be able pop that front wheel up with a little twist of the throttle.
  6. Osirris

    2015 YZ250FX feels jerky...

    Thanks for pointing that out NB061. Yes, I would like info on the YZ250FX too. -MidLifeCrisisGuy, is your mapping for a YZ250FX? Thanks
  7. Osirris

    2015 YZ250FX feels jerky...

    I am I'm much need in finding a great all around map and some good guidance. I have been reading a lot of treads regarding remapping and some say the bike runs lean and others say it runs rich from factory and I'm too dumb to figure it out. lol I just received my GYTR PT and honestly need some good advice since I'm not that sharp at figuring out all this stuff. I have a 2015 YX250FX with only 2 modification: FMF 4.1 silencer with Spark arrestor installed and the Air box modification. After all the mods were done it seams like it softened the bottom end. I would like to regain it back or improve it. -MidLifeCrisisGuy, I going to test your map a try, it looks good. Here are some other maps for testing which I have gotten from reading online and will be trying. DBT MAP Fuel Ign -2 -3 -3 0 0 0 +1 -1 -3 +1 +1 +0 +1 0 0 0 +1 0 Gaz's Hardened Linear: Fuel Ign 0 1 -1 -1 0 0 1 2 0 -1 -1 0 0 2 1 0 -1 0
  8. Osirris

    guys show me your kawasakis

    Here is my Kawi. I took here for a week ride up at Kennedy Meadows last week. I must say I love this bike way more than my KX265. I hope you guys like it.
  9. Osirris

    2008 KXF's

    He might have seen it in the September's Motocross Action issue.
  10. Osirris

    What gearing do you guys use?

    Yes, change the gearing to a 11 tooth Front and a 56 tooth rear sprocket. This will get rid of the bogging and give you that explosive corner exit speed you desire.
  11. Osirris

    any problems related to hotcams

    What did he said?
  12. Osirris

    I Have a problem with my 06 kxf

    When checking the needle meaning I should richen it by moving the clip 1 position down on the needle? Thanks for you guys help.
  13. Osirris

    I Have a problem with my 06 kxf

    I know what you mean, I have the same problem. I re-jetted the bike and have raised the pilot jet to size 45 then to size 48 and I still get that poping and blue flames blowing out my silencer. I'm clueless on whats going on, but it tends to happen more when its turned on while on the stand.
  14. Osirris

    Performance Parts

    The definition of fight is not only a physical thing but can also be verbal or of some type of contest (Function: noun). But you already knew that, didn't you.
×