Jump to content

TUGG

Members
  • Content count

    10
  • Joined

  • Last visited

Community Reputation

10 Neutral

About TUGG

  • Rank
    TT Newbie

Profile Information

  • Location
    England
  1. Hi I have a '04 kxf250 and it will only start when the throttle is very slightly open. I have cleaned out the carb,checked the float height ,I have the fuel screw turned out 2 turns. I would be gratefull for any other suggestions
  2. TUGG

    need info for fork oil

    Hi, I have the info for a kxf250'04 model, I don't think they changed in '05,externally they are the same 48mm kayaba 5 weight oil 564ml +/-4ml 95mm compressed with spring removed adjustable range 70-120mm I hope this helps.
  3. I'm From Romford In Essex. I Only Ordered The Seals Off Ebay For Convenience As My Nearest Mx Shop Is About 30 Mins Drive And I Would Still Probably Have To Order Them In .
  4. THANKS THAT WILL BE REALLY HELPFULL OF YOU
  5. Yeah That Bit I Know Its The Od And Thickness I Need To Find Out
  6. TUGG

    Hard restarting bike after stalling out

    YEAH I'M HAVING TROUBLE ADJUSTING BACK TO FOUR STROKE AFTER RIDING A YZ125 FOR THE PAST SIX MONTHS
  7. HI DOES ANY ONE KNOW THE EXACT SIZE OF THE FORK SEAL ON A KXF250'04.I ORDERED A PAIR OFF EBAY AND THEY TURNED UP BEING THE WRONG SIZE.I GOT IN CONTACT WITH THE SELLER HE SAID "I CAN GET ANY SIZE SEAL I JUST NEED TO KNOW WHAT SIZE THEY ARE"TROUBLE IS I DONT WANT TO STRIP MY FORKS JUST TO TELL HIM THE SIZE AND THEN HAVE NO BIKE TO RIDE UNTIL A PAIR OF SEALS TURN UP
  8. TUGG

    Kxf250 Stalls After Hard Landing

    Thanks for all your sugestions I had put fresh gas in it so it isn't the gas, the valve clearances where checked before going out as it was first time out since a engine rebuild .I think maybe i will check the float height and give the carb a clean and see how it goes. Cheers
  9. TUGG

    Kxf250 Stalls After Hard Landing

    Yes It Has Been Sitting For About Six Months. I Got A Sh?tload Of Dust In The Engine From A Bad Fitting Filter. I Cleaned The Carb Out Then But The Next Time I Rode It I Had Problems Starting It. Ihad Taken The Coating Off The Intake Valves. Too Busy To Work On It So I Pushed It To The Back Of The Garage And Used My Trusty Yz 125 Instead. I've Only Just Found The Time To Work On It Coz I'm Always Fixing My Sons Bikes Making Sure Their O.k For Race Day.anyway I Still Think Its Strange That The Engine Dies Only On Hard Landings.but I Was Guessing It Might Be Carb Problems But Iwondered If Anyone Else Has Had This Problem And What They Had Found.
  10. I Took My '04 Kxf250 Out For A Blast Today (first Time Since Top End Rebuild) I Had To Run The Idle High To Keep It From Stalling But If I Hit A Jump A Little Bit Hard The Bike Would Stall After Landing.i Kept The Bike Rolling In Gear But It Would Not Fire Up But When I Stopped It Would Start After 2 Kicks. Has Anyone Got Any Ideas.cheers
×