Help, I'm having a mare trying to start my TE250 after I stalled it during a Hare and Hound with a clunk! . I've checked the valve and valve clearances OK, sparks OK, fuel looks OK. I put a compression tester on the engine and only got 60psi, is this OK or should it be a lot higher. I cannot find the spec anywhere so if anyone has any ideas, thanks.
Hi I'm trying to put the lifter plate and 4 springs back on my 91 XR250 and am unsure as to the torque to tighten the 4 bolts, and even if they have to be tightened right up as I did not take any notice when I removed the plate. The Haynes manual says "not specified", has anyone any ideas. Many thanks.