Jump to content

KTM KTM

Members
  • Content Count

    8
  • Joined

  • Last visited

About KTM KTM

  • Rank
    TT Newbie

Profile Information

  • Location
    Australia
  1. Does anyone have the positioning diagram or info for the Holeshot device for a KTM 250SXF. I bought the KTM origional product but there was no positioning instructions with it...I heard the 125/250's are the same. Thanks
  2. KTM KTM

    my ktm 250sxf not starting

    KTM replaced our gas cap under warranty with a new style cap..The dealer phoned us and asked if it was leaking, we said yes and they gave us a new one, no more leaking.
  3. KTM KTM

    250sxf suspension set up

    Thanks Dave, will give Terry Hays a call this week.
  4. Any suspension GURU have any ideas. I weigh 154lb/70kg am 5'10'', have a 2006 KTM 250 SXF and ride A level MX. Someone suggested, maybe 1. leaving the standard front fork springs and fitting GOLD VALVES, 2. changing the rear PDS spring with a Race Tech P20 Progressive spring. Any advice is appreciated.
  5. Any suspension GURU have any ideas. I weigh 154lb/70kg am 5'10'', have a 2006 KTM 250 SXF and ride A level MX. Someone suggested, 1. leaving the standard front fork springs and fitting GOLD VALVES, 2. changing the rear PDS spring with a Race Tech P20 Progressive spring. Any advice is appreciated.
  6. if the KTM 250SXF is the only 250F not to use a leak jet with the accelerator pump....why not install a leak jet?
  7. KTM KTM

    250 sxf starting problems

    Thanks for the help mate. I'm going to try and adjust the accelerator pump screw to reduce the amount of fuel delivered. I figure maybe too much fuel is being injected when the bike is HOT. Also my kick action maybe too fast?
  8. I'm havin huge problems starting my 250sxf when hot..tried all I know, so has the mechanics. Almost ready to give up...any suggestions on what I can try? Once I ride it for say a 30 min moto and stop, it won't start(even pushin)
×